Features & Benefits

MSD ProMag are used in extreme racing conditions and we hand build our non-magnetic pickups with these conditions in mind. Each pickup is wound on special bobbins and terminated to our tinned conductor, teflon jacketed wiring. A strain relief protects the wiring where it leaves the threaded housing. Once assembled, the wires are placed in a vacuum chamber and the windings are potted in a fracture resistant epoxy compound for durability in extreme conditions. The non-magnetic pickups are available in two housing sizes. The 3/4 In. diameter model is for use with MSD’s flying magnet crank trigger kits. The 3/8 In. diameter model is for use with MSD’s sprint car crank trigger systems, as well as the aftermarket kits from RCD and PSI.

• Completely potted for durability in harsh racing conditions
• Strain relief on wire grouping at bend point for long life
• Proprietary bobbin and winding design
• Designed and built in house

• Overall