Notes: Fifth wheel;

Notes: Fifth wheel;

Notes: Fifth wheel;

Notes: Fifth wheel;

Notes: Fifth wheel;

Notes: Fifth wheel;

Notes: 90 degree, 7-way flat pin connector assembly, 7 feet. Under vehicle driver side. Install time 45 minutes, no drill. 2 wire system no converter required but a ModuLite® can be used. Fifth wheel adapter.

Notes: 90 degree, 7-way flat pin connector assembly, 7 feet. GM- Ford. Fifth wheel adapter

Notes: 90 degree, 7-way flat pin connector assembly, 7 feet. Under vehicle driver side. Install time 45 minutes, no drill. 3 wire system with O.E.M. standard 2 wire harness. Fifth wheel adapter.

Notes: 2 wire system no converter required but a Modulite® can be used install time 5 minutes 4 flat. With towing package

Notes: 2 wire system no converter required but a Modulite® can be used install time 5 minutes 7 way

Notes: 2 wire system no converter required but a Modulite® can be used. 4 flat

Notes: 3 wire system requires converter but a Modulite® can be used T-one is equipped with circuit protected Modulite® module install time 20 minutes 4 flat; with circuit protected Modulite® module

Notes: 3 wire system requires converter but a Modulite® can be used install time 10 minutes T-one incorporates taillight converter may be equipped with factory tow prepared plug; determine at time of install. 4 flat

Notes: 3 wire system requires converter but a Modulite® can be used install time 5 minutes 4 flat

Notes: 3 wire system requires converter but a Modulite® can be used T-one is equipped with circuit protected Modulite® module install time 5 minutes with factory tow package Modulite® recommended. 4 flat; with circuit protected Modulite® module

Notes: 2 wire system no converter required but a Modulite® can be used 2 wire system with pulse width modulation upgraded Modulite® required install time 5 minutes without backup sensors built into rear bumper. 4 flat

Notes: 3 wire system requires converter but a Modulite® can be used T-one is equipped with circuit protected Modulite® module install time 20 minutes drilling required. 7 way; with circuit protected Modulite® HD module

Notes: 3 wire system with OEM standard 2 wire harness. 7 way flat pin; for US car connector assembly; 7 ft.

Notes: 3 wire system requires converter but a Modulite® can be used install time 5 minutes 4 flat. With towing package

Notes: 7 way; install time 5 minutes

Notes: 3 wire system requires converter but a Modulite® can be used install time 5 minutes 4 flat

Notes: 4 flat; with circuit protected Modulite® module; T-one is equipped with circuit protected Modulite® module

Notes: 4 flat; with upgraded circuit protected converter