AutoZone 1998 Chevrolet Truck Blazer 4WD 4.3L SFI 6cyl | Repair Guides | Chassis Electrical | Heating And Air Conditioning | Blower Motor Resistor Or Power Transistor | AutoZone.com

Search suggestions

    My Vehicles

    1998 Chevrolet Truck Blazer 4WD 4.3L SFI 6cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    SAVE 20% + GET A $10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OVER $100.

    Use Code: 20STACK10

    See Details

    Chrysler Colt/Vista 1990-1993 Repair Information

    Blower Motor Resistor or Power Transistor

    Print

    REMOVAL & INSTALLATION



    1. Disconnect the negative battery cable.
    2.  
    3. Remove the glove box assembly. The resistor or power transistor is accessible through the glove box opening and is mounted to the blower or evaporator case.
    4.  
    5. Disconnect the wire harness from the resistor.
    6.  
    7. Remove the mounting screws and remove the resistor.
    8.  
    9. The installation is the reverse of the removal procedure. Make sure the seal is intact when installing.
    10.  
    11. Connect the negative battery cable and check the entire climate control system for proper operation.
    12.  

     
    AutoZone Logo