AutoZone 1985 Hino Medium/HD Trk FE19 6.5L Turbo Diesel 6cyl | Repair Guides | Driveability & Emissions Controls | Electronic Engine Controls | Idle Tracking Switch | AutoZone.com

Search suggestions

    My Vehicles

    1985 Hino Medium/HD Trk FE19 6.5L Turbo Diesel 6cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: FALLSAVINGS

    See Details

    Ford Escort/Lynx 1981-1990 Repair Guide

    Idle Tracking Switch

    Print

    Testing

    MCU Systems

    See Figure 1

    1. Check that the idle tracking switch contacts are open when the switch is actuated (closed throttle) and that the contacts are closed when the switch is not actuated (part throttle).
    2.  
    3. If the switch contacts are open when the switch is actuated (closed throttle), the switch is functioning properly.
    4.  
    5. If the contacts are closed when the switch is not actuated (part throttle), proceed as follows:
      1. Turn the ignition key OFF .
      2.  
      3. Disconnect the module from the harness.
      4.  
      5. Use a Digital Volt Ohmmeter (DVOM) to measure the resistance between circuits 189 and 687 (refer to the accompanying illustration). The resistance should be between 280-380 ohms.
      6.  

    6.  
    7. If the resistance is not in range, replace the resistor and the switch.
    8.  



    Click image to see an enlarged view

    Fig. Fig. 1: Idle tracking switch wiring schematic-MCU systems

     
    AutoZone Logo