AutoZone 2006 Pontiac G6 GTP 3.9L SFI 6cyl | Repair Guides | Body & Trim | Interior | Seat Belt Systems | AutoZone.com

Search suggestions

    My Vehicles

    2006 Pontiac G6 GTP 3.9L SFI 6cyl

    Find a Store

    Select Store

    Save 20% Sitewide

    Use Code: YOUCHOOSE20

    See Details

    Get A $25 Gift Card

    Use Code: YOUCHOOSE25

    See Details

    GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

    Seat Belt Systems

    Print

    REMOVAL & INSTALLATION



    Front Outboard

    See Figures 1, 2, 3 and 4

    1998-94 LUMINA, REGAL AND CUTLASS SUPREME1988-93 GRAND PRIX SEDANS1988-96 GRAND PRIX COUPE


    Click image to see an enlarged view

    Fig. Fig. 1: Front outboard seat belt and retractor - 1994-96 Lumina sedan, Regal sedan and Cutlass Supreme sedan



    Click image to see an enlarged view

    Fig. Fig. 2: Front outboard seat belt and retractor -1988-94 Lumina coupe, Cutlass Supreme coupe and 1988-96 Grand Prix Coupe



    Click image to see an enlarged view

    Fig. Fig. 3: Front outboard seat belt and retractor -1995-96 Lumina coupe, Regal coupe and Cutlass Supreme coupe



    Click image to see an enlarged view

    Fig. Fig. 4: Front outboard seat belt and retractor -1988-94 sedans except 1994 Grand Prix sedan

    1. Remove the 20 amp courtesy lamp fuse.
    2.  
    3. Remove the door trim panel.
    4.  
    5. Remove the screws securing the belt retainer to the door.
    6.  
    7. Unplug the electrical connectors from the retractors.
    8.  
    9. Remove the retaining nuts from the retractor and remove the retractor.
    10.  
    11. Remove the shoulder belt retractor.
    12.  
    13. Pull back the water deflector and raise the window.
    14.  
    15. Remove the cover, nut, and washer from the upper guide loop and remove the upper guide loop.
    16.  

    To install:
    1. Install the upper guide loop.
    2.  
    3. Install the washer and nut while holding the upper guide loop in place. Tighten the nut to 21 ft. lbs. (28 Nm).
    4.  
    5. Install the cover and water deflector.
    6.  
    7. Install the shoulder belt retractor. Tighten the nuts to 31 ft. lbs. (42 Nm).
    8.  
    9. Install the seat belt retractor. Tighten the nuts to 31 ft. lbs. (42 Nm).
    10.  
    11. Engage the electrical connectors.
    12.  
    13. Install the belt retainer with the screws.
    14.  
    15. Install the trim panel and put the fuse back.
    16.  

    1995-96 LUMINA, REGAL AND CUTLASS SUPREME SEDANS
    1. Open the seat belt guide loop cover.
    2.  
    3. Remove the guide loop nut.
    4.  
    5. Remove the guide loop from the guide loop adjuster bracket.
    6.  
    7. Remove the rear carpet retainer.
    8.  
    9. Remove the anchor plate bolt/screw.
    10.  
    11. Remove the anchor plate from the center pillar.
    12.  
    13. Remove the belt from the hole at the bottom of the carpet retainer.
    14.  
    15. Remove the retractor bolt/screw and remove the retractor.
    16.  

    To install:
    1. Hook the belt retractor tab into the T-slot in the center pillar.
    2.  
    3. Install the retractor and retaining bolt/screw and tighten to 31 ft. lbs. (42 Nm).
    4.  
    5. Route the belt through the hole at the bottom of the carpet retainer.
    6.  
    7. Position the anchor plate to the center pillar.
    8.  

    Before installing the anchor bolt/screw, make sure to twist the belt1/2turn inboard.

    1. Install the anchor plate bolt/screw and tighten to 31 ft. lbs. (42 Nm).
    2.  
    3. Route the belt through the slot in the rear carpet retainer.
    4.  
    5. Install the rear carpet retainer.
    6.  
    7. Position the guide loop to the guide loop adjuster bracket.
    8.  
    9. Install the guide loop nut and tighten to 31 ft. lbs. (42 Nm).
    10.  
    11. Close the seat belt guide loop cover.
    12.  

    1994-96 GRAND PRIX SEDANS
    1. Remove the rear lower carpet retainer.
    2.  
    3. Remove the lap belt mounting bolt.
    4.  
    5. Remove the seat belt latch.
    6.  
    7. Remove the seat belt guide from the upper pillar.
    8.  
    9. Remove the retractor mounting bolt and remove the retractor.
    10.  

    To install:
    1. Install the retractor and retaining bolt and tighten to 31 ft. lbs. (42 Nm).
    2.  
    3. Install the seat belt guide to the upper pillar.
    4.  
    5. Install the seat belt latch.
    6.  
    7. Install the lap mounting bolt and tighten to 31 ft. lbs. (42 Nm).
    8.  
    9. Install the rear lower carpet retainer.
    10.  

    1995-96 MONTE CARLO, REGAL AND CUTLASS SUPREME COUPES
    1. Remove the rear seat cushion and seatback.
    2.  
    3. Remove the rear window trim panel.
    4.  
    5. Open the guide loop cover.
    6.  
    7. Remove the guide loop bolt/screw.
    8.  
    9. Remove the guide loop from the quarter upper trim panel.
    10.  
    11. Remove the coat hook.
    12.  
    13. Remove the quarter upper trim finish panel.
    14.  
    15. Remove the quarter lower trim finish panel.
    16.  
    17. Remove the seat belt from the slit in the seat belt guide.
    18.  
    19. Remove the plug from the anchor bolt/screw.
    20.  
    21. Remove the the anchor bolt/screw, washer and bushing.
    22.  
    23. Remove the the belt from the slot in the quarter lower trim finish panel.
    24.  
    25. Remove the retractor mounting bolt/screw and remove the retractor.
    26.  

    To install:
    1. Hook the belt retractor tab into the T-slot in the quarter lower trim finish panel.
    2.  
    3. Install the retractor and retaining bolt and tighten to 31 ft. lbs. (42 Nm).
    4.  
    5. Route the belt through the slot in the quarter lower trim finish panel.
    6.  

    Before installing the anchor bolt/screw, make sure to twist the belt1/2turn inboard.

    1. Install the anchor plate bolt/screw with the washer and bushing and tighten to 31 ft. lbs. (42 Nm).
    2.  
    3. Install the plug to the anchor bolt/screw.
    4.  
    5. Install the seat belt through the slit in the seat belt guide.
    6.  
    7. Install the quarter lower trim finish panel.
    8.  
    9. Install the quarter upper trim finish panel.
    10.  
    11. Install the coat hook.
    12.  
    13. Position the guide loop to the quarter upper trim panel.
    14.  
    15. Install the guide loop bolt/screw and tighten to 31 ft. lbs. (42 Nm).
    16.  
    17. Close the guide loop cover.
    18.  
    19. Install the rear window trim panel.
    20.  
    21. Install the rear seat cushion and seatback.
    22.  

    Center Belts

    To remove the front center belts, simply pull them through the seat split and unbolt them from the floor. To remove the rear center belts, remove the rear seat cushion to reveal the bolts, and remove them. When installing, tighten the bolts to 31 ft. lbs. (42 Nm).

    Rear Outboard

    See Figures 5 and 6

    1. Remove the rear seat cushion and seatback.
    2.  
    3. Remove the seat/window trim panel.
    4.  
    5. Remove the bolt securing the guide loop anchor plate using the proper Torx®socket.
    6.  
    7. Remove the bolts securing the belt assembly and retractor.
    8.  
    9. Remove the spacer if equipped, the retractor, and the belt assembly.
    10.  

    To install:
    1. Install the belt assembly, retractor (be sure to seat the alignment tabs), and the spacer.
    2.  
    3. Install the retractor retaining bolt and tighten to 31 ft. lbs. (42 Nm).
    4.  
    5. Install the guide loop anchor plate bolt and tighten to 31 ft. lbs. (42 Nm).
    6.  
    7. Install the trim panel and seat parts.
    8.  



    Click image to see an enlarged view

    Fig. Fig. 5: Rear outboard seat belt and retractor -all 1995-96 Monte Carlo and Grand Prix Coupe



    Click image to see an enlarged view

    Fig. Fig. 6: Rear outboard seat belt and retractor -1988-94 Grand Prix and Lumina coupe,1988-96 Regal and Cutlass Supreme coupesand all 1988-94 sedans

     
    AutoZone Logo