REMOVAL & INSTALLATION
See Figures 1, 2 and 3
- Disconnect the negative battery cable.
- Siphon the washer fluid from the reservoir.
- Unfasten the reservoir mounting screws.
- Detach the washer motor electrical connector and washer hose.
- Remove the assembly from the engine compartment.
- The installation is the reverse of the removal procedure.
- Fill the reservoir with a suitable washer fluid.
- Connect the negative battery cable and check the washer for proper operation.
Fig. Fig. 1: Location of the windshield washer fluid reservoir-1996 3.4L engine shown
Fig. Fig. 2: After installing the reservoir, remove the cap...
Fig. Fig. 3: ... then fill the reservoir with the proper type and amount of windshield washer fluid
Back to Top
