AutoZone 2002 Saturn L200 (4-cyl) 2.2L MFI DOHC 4cyl | Repair Guides | Chassis Electrical | Circuit Protection | Fuses | AutoZone.com

Search suggestions

    My Vehicles

    2002 Saturn L200 (4-cyl) 2.2L MFI DOHC 4cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: FALLSAVINGS

    See Details

    Mazda Trucks 1994-1998 Repair Guide

    Fuses

    Print

    See Figures 1 through 16



    Click image to see an enlarged view

    Fig. Fig. 1: Fuse panel and identification chart for the Navajo



    Click image to see an enlarged view

    Fig. Fig. 2: Underhood power distribution box and identification chart for the Navajo



    Click image to see an enlarged view

    Fig. Fig. 3: Fuse panel and identification chart for 1994-95 MPV



    Click image to see an enlarged view

    Fig. Fig. 4: Underhood power distribution box and identification chart for 1994-95 MPV



    Click image to see an enlarged view

    Fig. Fig. 5: Fuse panel and identification chart for 1996-98 MPV



    Click image to see an enlarged view

    Fig. Fig. 6: Underhood power distribution box and identification chart for 1996-98 MPV



    Click image to see an enlarged view

    Fig. Fig. 7: Fuse panel and identification chart for 1994 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 8: Underhood power distribution box and identification chart for 1994 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 9: Power distribution box (main fuse block) number identifications for 1995-97 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 10: Fuse block number identifications for 1995-98 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 11: Fuse panel identification chart for 1995 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 12: Fuse panel identification chart for 1996-97 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 13: Fuse panel and identification chart for 1998 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 14: Power distribution box identification chart for 1995-96 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 15: Power distribution box identification chart for the 1997 B Series Pick-up



    Click image to see an enlarged view

    Fig. Fig. 16: Power distribution box and identification chart for the 1998 B Series Pick-up

    REPLACEMENT



    Fuse Panel

    See Figures 17, 18 and 19

    Located inside the passenger compartment, under the drivers-side of the instrument panel.

    1. Turn the ignition switch OFF .
    2.  



    Click image to see an enlarged view

    Fig. Fig. 17: Location of the interior fusebox under the driver side dashboard-MPV



    Click image to see an enlarged view

    Fig. Fig. 18: To access the fuses, remove the fuse panel cover. Note the spare fuses (A) and provided fuse puller tool (B)-Navajo and B Series Pick up

    1. If equipped, remove the fuse panel access cover.
    2.  
    3. If equipped, remove the fuse puller tool from the cover.
    4.  



    Click image to see an enlarged view

    Fig. Fig. 19: Using the provided tool or a pair of pliers, grasp the fuse and pull it from the panel

    1. Grasp the push-in type fuse with the provided tool, or a pair of needle-nose pliers.
    2.  
    3. Look through the side of the fuse body to determine if the fuse element is blown.
    4.  

    To install:
    1. Check the amperage rating of the fuse which was removed and obtain a new fuse of the same rating.
    2.  


    WARNING
    Never replace a blown fuse with a new fuse of a higher rating. Severe electrical damage, as well as possible electrical fire could result.

    1. Align the fuse with its mounting position and push it into place until fully seated in the panel.
    2.  
    3. Turn the ignition switch on and operate the accessory that was protected by that fuse.
    4.  


    WARNING
    If the fuse continues to blow, inspect and test the wire harness and component or components which are protected by that fuse.

    Power Distribution Box

    See Figures 20 through 24

    Located under the hood, in the engine compartment. It houses the fuses and relays for most of the under hood components which are not controlled by a dash mounted switch (such as the alternator, fuel pump, ECM, etc.). The fuses and relays are replaced in the same manner as the fuse panel inside the vehicle. The power distribution box cover is hinged on one end and utilizes a retaining latch on the other. Simply release the latch and lift the cover up to gain access to the fuses and relays.



    Click image to see an enlarged view

    Fig. Fig. 20: Location of the fuses are illustrated on the power distribution box top cover-right side shown



    Click image to see an enlarged view

    Fig. Fig. 21: Pulling out a fuse from the power distribution box located on the right side of the engine compartment



    Click image to see an enlarged view

    Fig. Fig. 22: Location of the power distribution box on the left side of the engine compartment



    Click image to see an enlarged view

    Fig. Fig. 22: Location of the power distribution box on the left side of the engine compartment



    Click image to see an enlarged view

    Fig. Fig. 24: Pulling out a relay from the left side power distribution box

     
    AutoZone Logo