AutoZone 2007 GMC Truck Yukon 4WD 5.3L Flex Fuel OHV 8cyl | Repair Guides | Suspension & Steering | Front Suspension | Compression Rod And Stabilizer Bar | AutoZone.com

Search suggestions

    My Vehicles

    2007 GMC Truck Yukon 4WD 5.3L Flex Fuel OHV 8cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    CLOSED Open tomorrow at 7:30 AM

    SAVE 20% + GET A $10 GIFT CARD ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: LABORDAY

    See Details

    Nissan Pick-ups and Pathfinder 1989-1995

    Compression Rod and Stabilizer Bar

    Print

    REMOVAL & INSTALLATION



    See Figures 1, 2, 3 and 4

    4wd Models Only
    1. With the truck resting on its wheels, remove the underpan.
    2.  
    3. If the compression rod installation is correct, the white painted marks on the stabilizer bar, at the bushings, should be visible.
    4.  



    Click image to see an enlarged view

    Fig. Fig. 1: Compression rod attachment points-4wd models



    Click image to see an enlarged view

    Fig. Fig. 2: View of the compression rod with bushings installed in the vehicle-4wd models



    Click image to see an enlarged view

    Fig. Fig. 3: Removing the stabilizer bar bushing bracket



    Click image to see an enlarged view

    Fig. Fig. 4: Removing the stabilizer bar bushing-note position of bushing upon installation

    1. The compression rod and stabilizer bar can be unbolted and removed with the vehicle supported on jackstands.
    2.  
    3. To install, simply position the component and tighten the nuts and bolts. Tighten the stabilizer bar through-bolt and the bar bushing clamp bolts to 12-16 ft. lbs. (16-22 Nm). Tighten the compression rod-to-lower link bolts to 87-108 ft. lbs. (118-147 Nm); and the compression rod-to-frame anchor nut to 87-116 ft. lbs. (118-157 Nm). Replace the bushings whenever the parts are changed. Replace any bushing that appears dry, cracked or compressed.
    4.  
    5. Check the stabilizer bar with the truck on its wheels to see if both white painted marks on the stabilizer bar are visible at the bushings.
    6.  

     
    AutoZone Logo