AutoZone | Repair Guides | Body | Interior | Inside Rear View Mirror | AutoZone.com

Search suggestions

    My Vehicles

    Add a Vehicle

    Find a Store

    Select Store

    Save 20% Sitewide

    Use Code: YOUCHOOSE20

    See Details

    Get A $25 Gift Card

    Use Code: YOUCHOOSE25

    See Details

    Toyota Corolla 1988-1997 Repair Guide

    Inside Rear View Mirror

    Print

    REMOVAL & INSTALLATION



    The inside mirror is held to its bracket by screws. Usually these are covered by a colored plastic housing which must be removed for access. These covers can be stubborn; take care not to gouge the plastic during removal.

    Once exposed, the screws are easily removed. The mirror mounts are designed to break away under impact, thus protecting your head and face from serious injury in an accident.

    See Figures 1 and 2



    Click image to see an enlarged view

    Fig. Fig. 1: Carefully pry off the cover to exposed the screws

    Reassembly requires only common sense (which means you can do it wrong-pay attention); make sure everything fits without being forced and don't overtighten any screws or bolts.



    Click image to see an enlarged view

    Fig. Fig. 2: Remove the retaining screws, then lower the mirror

     
    AutoZone Logo