AutoZone 2005 Honda Truck CR-V 4WD 2.4L MFI DOHC 4cyl | Repair Guides | Heating & Air Conditioning | Control Panel | Removal & Installation | AutoZone.com

Search suggestions

    My Vehicles

    2005 Honda Truck CR-V 4WD 2.4L MFI DOHC 4cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    SAVE 20% + GET A $10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OVER $100.

    Use Code: 20STACK10

    See Details

    Vibe 2003-2005

    Removal & Installation

    Print

    1. Remove the radio.
    2.  
    3. Remove the center knob from the HVAC control unit
    4.  
    5. Remove the screw from the control unit.
    6.  
    7. Remove the center console and heater control trim panel.

      Click image to see an enlarged view

      Fig. Remove the center console and heater control trim panel (1)

    8.  
    9. Remove the electrical connector from the HVAC control unit.

      Click image to see an enlarged view

      Fig. Remove the mode control cable from the HVAC control unit

    10.  
    11. Remove the mode control cable from the HVAC control unit.

      Click image to see an enlarged view

      Fig. HVAC control unit

    12.  
    13. Remove the following from the HVAC control unit:
      1. The temperature control cable
      2.  
      3. The A/C cable
      4.  

    14.  
    15. Remove the HVAC control unit.
    16.  
    17. Remove the following from the HVAC control unit:
      1. The mode control and temperature control knobs
      2.  
      3. The lamp bulbs
      4.  

    18.  

    To install:

    1. Install the following to the HVAC control unit:
      1. The lamp bulbs
      2.  
      3. The mode control and temperature control knobs
      4.  
      5. The electrical connector
      6.  
      7. The mode control cable
      8.  
      9. The temperature control cable
      10.  
      11. The A/C cable
      12.  

    2.  
    3. Install the HVAC control unit to the instrument panel.
    4.  
    5. Install the center console and heater control trim panel (1). Secure the panel with the screw.
    6.  
    7. Install the center knob to the HVAC control unit.
    8.  
    9. Adjust the cables as necessary, refer to the following:
    10.  
    11. Install the radio.
    12.  

    1. Remove the radio.
    2.  
    3. Remove the center knob from the HVAC control unit
    4.  
    5. Remove the screw from the control unit.
    6.  
    7. Remove the center console and heater control trim panel.

      Click image to see an enlarged view

      Fig. Remove the center console and heater control trim panel (1)

    8.  
    9. Remove the electrical connector from the HVAC control unit.

      Click image to see an enlarged view

      Fig. Remove the mode control cable from the HVAC control unit

    10.  
    11. Remove the mode control cable from the HVAC control unit.

      Click image to see an enlarged view

      Fig. HVAC control unit

    12.  
    13. Remove the following from the HVAC control unit:
      1. The temperature control cable
      2.  
      3. The A/C cable
      4.  

    14.  
    15. Remove the HVAC control unit.
    16.  
    17. Remove the following from the HVAC control unit:
      1. The mode control and temperature control knobs
      2.  
      3. The lamp bulbs
      4.  

    18.  

    To install:

    1. Install the following to the HVAC control unit:
      1. The lamp bulbs
      2.  
      3. The mode control and temperature control knobs
      4.  
      5. The electrical connector
      6.  
      7. The mode control cable
      8.  
      9. The temperature control cable
      10.  
      11. The A/C cable
      12.  

    2.  
    3. Install the HVAC control unit to the instrument panel.
    4.  
    5. Install the center console and heater control trim panel (1). Secure the panel with the screw.
    6.  
    7. Install the center knob to the HVAC control unit.
    8.  
    9. Adjust the cables as necessary, refer to the following:
    10.  
    11. Install the radio.
    12.  

     
    AutoZone Logo