AutoZone | Repair Guides | Chassis Electrical | Windshield Wipers And Washers | Internal Governor/windshield Wiper Control Module | AutoZone.com

Search suggestions

    My Vehicles

    Add a Vehicle

    Find a Store

    Select Store

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: FALLSAVINGS

    See Details

    Ford Taurus/Sable 1986-1995 Repair Information

    Internal Governor/Windshield Wiper Control Module

    Print

    REMOVAL & INSTALLATION



    See Figure 1

    The internal governor is mounted on a bracket near the steering column support bracket.

    1. Disconnect the negative battery cable.
    2.  
    3. Disengage the electrical connector.
    4.  
    5. Remove the two retaining screws, then remove the component from the vehicle.
    6.  



    Click image to see an enlarged view

    Fig. Fig. 1: View of the internal governor/windshield wiper control module

    To install:
    1. Install the component in the vehicle, then secure using the retaining screws.
    2.  
    3. Engage the electrical connector.
    4.  
    5. Connect the negative battery cable, then check the wiper system for proper operation.
    6.  

     
    AutoZone Logo