AutoZone Product & HowTo Info | |

Search suggestions

    My Vehicles

    1972 Cadillac Deville 7.7L 4BL 8cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 9:00 PM today

    SAVE 20% + GET A $10 GIFT CARD ON ONLINE SHIP TO HOME ORDERS OVER $100.

    Use Code: 20STACK10

    See Details

    A/C Condenser

    Inspect/Service/Replace

    • Place the ignition switch in the "OFF" position.
    • Place a fender cover on the car to protect the finish.
    • Purge the system of refrigerant. Use the proper recovery equipment.
    • Locate the component that is to be removed for repair or replacement.
    • Remove access panel(s) or other hardware necessary to gain access to the component.
    • Remove the hood hold-down mechanism and any other cables or hardware that inhibit access to the condenser.
    • Remove the hot-gas line at the top of the condenser.
    • Remove and discard any O-rings.
    • Remove the liquid line at the bottom of the condener.
    • Remove and discard any O-rings.
    • Remove and retain any attaching bolts and/or nuts holding the condenser in place.
    • Lift the condenser from the car.
    • Install the new condenser by reversing these procedures.
    NOTE
    Be sure to install new O-rings, if equipped, on the hot gas and liquid lines.
    • Leak test the system.
    • Evacuate the system.
    • Charge the system with refrigerant.

    AutoZone Logo