AutoZone Product & HowTo Info | A | Wiper Arm

Search suggestions

    My Vehicles

    2005 GMC Truck Yukon XL Denali AWD 6.0L SFI 8cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    Save 20% Sitewide

    Use Code: YOUCHOOSE20

    See Details

    Get A $25 Gift Card

    Use Code: YOUCHOOSE25

    See Details

    Fuel Pump - Mechanical


    To determine that the fuel pump is in satisfactory operating condition, tests for both fuel pump pressure and fuel pump capacity should be performed.

    • Fuel pump testers vary depending on the tester manufacturer. Always use the tester according to the recommended procedure.
    • Normally, the procedure for checking a mechanical fuel pump begins by connecting the fuel pump tester between the carburetor inlet fuel line and the inlet nut.
    • Since the tester fittings contain heavy rubber washers, the tester fittings only require hand tightening.
    • Compare the recorded fuel pump pressure and the fuel volume against the specifications for the vehicle.
    • If the pressure or volume is less than specified, check the fuel filter for restrictions, and check the fuel lines for restrictions and leaks before replacing the fuel pump.
    • When air leaks into the fuel line between the fuel pump and the fuel tank, the fuel pump discharges some air with the fuel, which reduces pump volume.
    • When the fuel pump is removed, always check the camshaft lobe or eccentric for wear. The photo below shows the common problems found in a mechanical pump.
    Common problems associated with a mechanical fuel pump.

    AutoZone Logo