Inspect/Test/Replace

Follow your vehicle's service manual procedures for blower motor removal. The following are general removal procedures:

• Disconnect the negative battery cable.
• Disconnect the blower motor lead connector from the wiring harness connector.
• Remove the blower motor cooling tube from the blower motor.
• Remove the four retaining screws.
• Turn the motor and the wheel assembly slightly to the right so that the bottom edge of the mounting plate follows the contour of the wheel well splash panel.
• Lift up on the blower and remove it from the blower housing.
• Installation the new blower motor by reversing the removal steps.
• Connect the negative battery cable.