AutoZone Product & HowTo Info | | timing chain

Search suggestions

    My Vehicles

    1986 Dodge/Ram Truck B150 1/2 ton Van 5.2L 2BL 8cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    Save 20% Sitewide

    Use Code: YOUCHOOSE20

    See Details

    Get A $25 Gift Card

    Use Code: YOUCHOOSE25

    See Details

    Oil Pump Screen

    Inspect/Replace

    To access most oil pump screens, the engine oil pan must be removed.

    • The oil pump sump screen, or pickup, must be checked to be sure it is clean.
    • A new oil pump does not come with a new screen.
    • Some rebuilders replace every screen with a new one.
    • A plugged screen can ruin a new engine in a very short time.
    This pump screen is full of large pieces of foreign material. Courtesy of Federal-Mogul Corporation.
    When the bypass valve opens on a cold morning, the foreign material will be sucked into the oil pump. Courtesy of Federal-Mogul Corporation.
    • On a newly cleaned screen, make sure that the bypass is not struck permanently open.
    This pump screen is defective; the bypass should be seated against the strap.
    • Be certain that a screen does not have any loose or damaged wire mesh that could break loose and cause oil pump failure.

    AutoZone Logo