REMOVAL & INSTALLATION
Door Mounted
See Figure 1
- Remove the door trim panel.
- Remove the four speaker retaining screws.
- Disconnect the speaker lead wire connector and remove speaker.
- Connect the speaker lead wire connector.
- Position speaker to the door panel. Ensure that a watershield protector has been installed first.
- Install attaching screws.
- Install door panel on door and check speaker operation.
See Figures 2 and 3
- Remove the screws or unsnap retaining speaker grille cover and remove the cover.
- Remove the screws retaining the speaker to mount.
- Disconnect the speaker lead wire connector and remove speaker.
- Connect the speaker lead to the unit.
- Insert the speaker into the quarter panel, then tighten the mounting screws to 24-32 inch lbs. (2-4 Nm).
- Place the speaker cover into position and snap shut or screw tight.
- Check the operation of the speaker.


0 item
0 item





Back to Top
