AutoZone 2011 Subaru Impreza 2.5i Outback Sport AWD 2.5L SFI SOHC 4cyl | Repair Guides | Emission Controls | Trouble Codes | Clearing Codes | AutoZone.com

Search suggestions

    My Vehicles

    2011 Subaru Impreza 2.5i Outback Sport AWD 2.5L SFI SOHC 4cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    CLOSED Open at 7:30 AM

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OF $100 OR MORE.

    Use Code: SEECLEAR

    See Details

    ISUZU Amigo/Pick-ups/Rodeo/Trooper 1981-1996

    Clearing Codes

    Print

    Stored fault codes may be erased from memory at any time by removing power from the ECM for at least 30 seconds. It may be necessary to clear stored codes during diagnosis to check for any recurrence during a test drive, but the stored codes must be written down when retrieved. The codes may still be required for subsequent troubleshooting. Whenever a repair is complete, the stored codes must be erased and the vehicle test driven to confirm correct operation and repair.


    WARNING
    The ignition switch must be OFF any time power is disconnected or restored to the ECM. Severe damage may result if this precaution is not observed.

    Depending on the electrical distribution of the particular vehicle, power to the ECM may be disconnected by removing the ECM fuse in the fusebox, disconnecting the in-line fuse holder near the positive battery terminal or disconnecting the ECM power lead at the battery terminal. Disconnecting the negative battery cable to clear codes is not recommended as this will also clear other memory data in the vehicle such as radio presets.



    Click image to see an enlarged view

    Fig. Fig. 1: Diagnostic trouble codes-1.8L and 2.0L engines



    Click image to see an enlarged view

    Fig. Fig. 2: Diagnostic trouble codes-2.3L carbureted engines



    Click image to see an enlarged view

    Fig. Fig. 3: Diagnostic trouble codes-2.3L carbureted engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 4: Diagnostic trouble codes-2.3L and 1988-95 2.6L fuel injected engines



    Click image to see an enlarged view

    Fig. Fig. 5: Diagnostic trouble codes-2.3L and 1988-95 2.6L fuel injected engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 6: Diagnostic trouble codes-2.3L and 1988-95 2.6L fuel injected engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 7: Diagnostic trouble codes-2.8L, 3.1L and 3.2L engines



    Click image to see an enlarged view

    Fig. Fig. 8: Diagnostic trouble codes-2.2L engines



    Click image to see an enlarged view

    Fig. Fig. 9: Diagnostic trouble codes-2.2L engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 10: Diagnostic trouble codes-1996 2.6L engines



    Click image to see an enlarged view

    Fig. Fig. 11: Diagnostic trouble codes-1996 2.6L engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 12: Diagnostic trouble codes-1996 3.2L engines



    Click image to see an enlarged view

    Fig. Fig. 13: Diagnostic trouble codes-1996 3.2L engines (continued)



    Click image to see an enlarged view

    Fig. Fig. 14: Diagnostic trouble codes-1996 3.2L engines (continued)

     
    AutoZone Logo