AutoZone | Repair Guides | Chassis Electrical | Heating And Air Conditioning | Temperature Blend Door Actuator | AutoZone.com

Search suggestions

    My Vehicles

    Add a Vehicle

    Find a Store

    Select a Store

    GET A FREE $20 GIFT CARD FOR EVERY $100 SPENT ON SHIP TO HOME ORDERS.

    Use Code: AZGIFT20

    See Details

    Ford Crown Victoria/Grand Marquis 1989-1998

    Temperature Blend Door Actuator

    Print

    REMOVAL & INSTALLATION



    1990-98 Vehicles with Automatic Temperature Control
    1. Disconnect the negative battery cable.
      2.  
    2. Remove the instrument panel; refer to Body .
      3.  
    3. Disconnect the electrical harness to the temperature controller on the control assembly, from the blend door actuator.
      4.  
    4. Remove the 4 screws and remove the blend door actuator from the plenum.
      5.  

    To install:
    1. Position the blend door actuator on the plenum. Make sure the actuator cam is properly engaged with the temperature blend door crank arm.
      2.  
    2. Secure the blend door actuator to the plenum with the 4 screws.
      3.  
    3. Connect the temperature controller electrical harness to the blend door actuator.
      4.  
    4. Install the instrument panel and connect the negative battery cable.
      5.  

    See Figure 1

    Click image to see an enlarged view

    Fig. Fig. 1: Temperature blend door actuator installation-1990-98 vehicles with automatic temperature control

    Back to Top
     
    BUY IT HERE
    AutoZone Logo

    ©2001-2013  AutoZone, Inc. All Rights Reserved.

    Returning Customers

    Create an Account