Fig. Fig. 1 Remove the floor duct panel

Fig. Fig. 2 Remove the passenger side instrument panel brace retaining nut and bolt and remove the brace

Fig. Fig. 3 Remove the driver's side instrument panel brace lower nut and position the brace aside

Fig. Fig. 4 Remove the three bolts and position the module aside

Fig. Fig. 5 Remove the two floor duct screws (one on each side).

Fig. Fig. 6 Remove the panel/floor door vacuum control motor

Fig. Fig. 7 Remove the electronic blend door actuator

Fig. Fig. 8 Release the stops and lower the glove compartment door

Fig. Fig. 9 Release the stops and lower the glove compartment door

Fig. Fig. 10 Detach the actuator connector

Fig. Fig. 11 Remove the electronic blend door actuator and bracket assembly