AutoZone 1992 Plymouth Truck Voyager 4WD 3.3L MFI 6cyl | Repair Guides | Brakes | Front Disc Brakes | Brake Caliper | AutoZone.com

Search suggestions

    My Vehicles

    1992 Plymouth Truck Voyager 4WD 3.3L MFI 6cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    CLOSED Open at 7:30 AM

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OF $100 OR MORE.

    Use Code: SEECLEAR

    See Details

    Nissan Frontier, Xterra 1998-05

    Brake Caliper

    Print

    Removal & Installation



    1. Raise the vehicle and support safely.
    2.  
    3. Remove the appropriate tire and wheel assembly.
    4.  
    5. Remove the bolt attaching the brake hose to the caliper. Plug the brake hose to prevent brake fluid loss.
    6.  
    7. Remove the caliper support mounting bolts and lift the caliper assembly from the knuckle.
    8.  

    To install

    1. Position the caliper assembly onto the knuckle and install the bolts. Make sure the rotor fits between the brake pads. Torque the bolts to 53-72 ft. lbs. (72-92 Nm) for 2001-03 4-cyl. Frontier; 101-130 ft. lbs. (137-177 Nm) for all others.
    2.  
    3. Using new copper washers, connect the brake hose to the caliper. Torque the brake hose attaching bolt to 12-14 ft. lbs. (17-20 Nm).
    4.  
    5. Bleed the brake system.
    6.  
    7. Apply the brake pedal and inspect the system. Ensure proper operation and no leakage.
    8.  
    9. Install tire and wheel assembly. Lower the vehicle and road-test.
    10.  


      Click image to see an enlarged view

      Fig. Front disc brake components-2001-02



      Click image to see an enlarged view

      Fig. Front disc brake components-2003


    1. Raise the vehicle and support safely.
    2.  
    3. Remove the appropriate tire and wheel assembly.
    4.  
    5. Remove the bolt attaching the brake hose to the caliper. Plug the brake hose to prevent brake fluid loss.
    6.  
    7. Remove the caliper support mounting bolts and lift the caliper assembly from the knuckle.
    8.  

    To install

    1. Position the caliper assembly onto the knuckle and install the bolts. Make sure the rotor fits between the brake pads. Torque the bolts to 101-130 ft. lbs. (137-177 Nm).
    2.  
    3. Using new copper washers, connect the brake hose to the caliper. Torque the brake hose attaching bolt to 12-14 ft. lbs. (17-20 Nm).
    4.  
    5. Bleed the brake system.
    6.  
    7. Apply the brake pedal and inspect the system. Ensure proper operation and no leakage.
    8.  
    9. Install tire and wheel assembly. Lower the vehicle and road-test.

      Click image to see an enlarged view

      Fig. Front disc brake caliper-Frontier

    10.  

    1. Before servicing the vehicle, refer to the Precautions Section.
    2.  
    3. Drain the brake fluid, as necessary.
    4.  
    5. Raise the vehicle and support safely.
    6.  
    7. Remove the tire and wheel assembly.
    8.  
    9. Remove the bolt attaching the brake hose to the caliper. Plug the brake hose to prevent brake fluid loss.
    10.  
    11. Remove the caliper support mounting bolts and lift the caliper assembly from the knuckle.
    12.  

    To install

    1. Position the caliper assembly onto the knuckle and install the bolts. Make sure the rotor fits between the brake pads. Torque the bolts to specification.
    2.  
    3. Using new copper washers, connect the brake hose to the caliper. Torque the brake hose attaching bolt to specification.
    4.  
    5. Bleed the brake system.
    6.  
    7. Apply the brake pedal and inspect the system. Ensure proper operation and no leakage.
    8.  
    9. Install tire and wheel assembly. Lower the vehicle and roadtest.

      Click image to see an enlarged view

      Fig. Front disc brake and related components-1998-2002



      Click image to see an enlarged view

      Fig. Front disc brake and related components-2003-2004



      Click image to see an enlarged view

      Fig. Front disc brake and related components-2005

    10.  

     
    AutoZone Logo