Duralast Reman Brake Caliper - Front D2892 - Read 1 Reviews on Duralast Reman #D2892

Duralast Reman Brake Caliper - Front

Vehicle Specific

Part Number: D2892
Features & Benefits

Duralast calipers are remanufactured to meet or exceed OEM performance.

  • Includes pad installation hardware
  • Rear parking brake hardware is installed and lubricated where applicable
  • 100% S.A.E. specific rubber seals ensure like-new performance
  • 100% pressure tested to guarantee proper function under all driving conditions
  • New bleeder screws provide trouble-free bleeding and a positive seal
  • New Banjo bolts and copper washers are included for a perfect seal (where applicable)
Product Details
Part Number: D2892
Weight: 6.50lbs
Notes: Enter your vehicle information above to see product notes.
Brake Caliper Finish: Unfinished
Brake Line Inlet Thread Size: M10 x 1.0
Brake Piston Count: 4
Caliper Bracket Included: Not Required
Color / Finish: Gray
Installation Hardware Included: Yes
Item Grade: Standard Replacement
Package Contents: Caliper, Hardware Kit
Product Condition: Remanufactured
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall

    Please wait while we process your request

    Please wait while we retrieve the user's information


    Your bio is currently empty. Now is a great time to fill in your profile.


    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.


    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Duralast Reman Brake Caliper - Front


    Sort by:

    1 review

    Please wait while we perform your request.

    Please wait while we perform your request.

    This review is hidden because you have chosen to ignore Member 2286249289. Show DetailsHide Details

    Acura TL Type S Brembo brake replacement

    went to change my brake rotors and pads on my 2007 Acura TL Type S and the bolts on the driver side caliper were very difficult to get off. This was because they last person to do the job cross threaded the caliper with the bolts. therefore, the caliper was ruined and I had no time for a machine shop and needed my car drivable by the next day. Called all over and Acura dealer wanted over 300$ and need to order it, Napa argued with me and said this car does not come with 4 piston brakes and tried to sell me the base TL caliper (what a joke). Finally I called auto zone and checked on the app and it said they had 1 re-manufactured 4 piston caliper in stock. headed down there to pick it up and it looks almost exactly like the OEM brembo caliper...few minor differences but nothing that stands out with a quick glance. Autozone, however does not carry the bolts to bolt the caliper on to the mounting bracket...bummer. So back to the acura dealer for the bolts. installation was very easy and I am happy with it so far. Only thing i can see is that it mounts like 1 or 2 mm off from the OEM brembo caliper, very hard to tell but i can see it. however stopping power feel the same and the car stops in a straight line with the autozone one on the driver side and the oem Brembo one on the passanger side. this is a lot cheaper that all the used brembo ones on ebay that look beat up for over 200$ but this one does not have Brembo ingraved on the backside....maybe i will change out the other one to this autozone one and sell the brembo one on ebay??? hmm! i did however buy the G2 caliper paint kit from amazon and re painted both calipers red and slapped some brembo stickers on them!

    Pros: easy to install and it fit!

    Cons: fitmnet is just a little off - very hard to tell however.


    left is driver side original brembo and right in...

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
    Browse to find other vehicles this part fits:





    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy


    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details


    Buy Online, Return
    Get More Details


    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods: