Dorman A/C Condenser Fan Assembly 620-244 - Read 1 Reviews on Dorman #620-244

Dorman A/C Condenser Fan Assembly

The part you selected DOES NOT FIT your vehicle
View Items That Fit
Part Number: 620-244
Features & Benefits

Save time, money and labor with Dorman's A/C condenser fan assembly. It comes ready to install as a complete assembly, eliminating the need to make separate purchases. Plus, our high quality engineering ensures optimal air flow and strength to prevent your vehicle from overheating.

  • Motor, shroud and blade included
  • Plug and play jumper harnesses included (where applicable)
  • Replacement helps sustain proper engine operation
  • Direct replacement for a proper fit every time
Product Details
Part Number: 620-244
Weight: 7.36lbs
Condenser Fan Type: Single
Fan Blade Material: Plastic Reinforced With Fiberglass
Package Contents: Condenser Fan Assembly
Shroud Material: Stamped Steel
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall

    Please wait while we process your request

    Please wait while we retrieve the user's information


    Your bio is currently empty. Now is a great time to fill in your profile.


    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.


    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Dorman A/C Condenser Fan Assembly


    Sort by:

    1 review

    Please wait while we perform your request.

    Please wait while we perform your request.

    This review is hidden because you have chosen to ignore Member 316924416. Show DetailsHide Details

    Nice Fan, but needs tweeking

    First let me say this is on my van and working great. 2009 Honda Odyssey. However, some things you should know.

    The tab that is created to hold the radiator fluid overflow reservoir is not in the right place. You will need to bend it around about .5-.75 inches to get it to fit right. Which is a little difficult while it is in place, but some needle nose pliers, hammer, flat head and the bolts and you should be able to get it.

    There is another tab attached for where a plastic clip would go to secure the wires. This is also not in the correct spot. This really isn't that big of a deal as the wires do not have a lot of slack to go anywhere. You can do without securing this.

    The other part about this is the heat shield that was on the OEM does not fit on this fan assembly. The holes are actually in the correct locations and threaded, but the thickness of the fan motor from those holes is more than the OEM. So if you line up the holes with the shield and go to attach you end up with the shield sitting against the fan motor and a gap between the mounting tabs and the fan assembly shroud.

    I am sorry that I did not take pictures to better clarify, but my simple project became more than planned pretty quickly. I will however bestow upon those who took the time to read this review some wisdom. On my van the service manual said to take out the battery, then the breather box, then the battery base, then some ground wire and clips, then the overflow tank, then the bumper. Then it wants you to shimmy the radiator fan out of the non hole you supposedly created with removing those things.

    After all that you can shimmy the AC Condenser fan through where the radiator fan was and out the non hole. THIS DOES NOT WORK!! I wasted a lot of time doing this only to stop and re-evaluate and kick myself for not taking a moment before hand to look at options instead of blindly following the manual.

    Instead of doing all of that and hating life. Do this. Remove the bumper, remove the radiator overflow tank, remove the upper radiator brackets and the upper AC brackets. Unfasten the upper radiator hose from the radiator. This allows you to lean the radiator out the front giving you enough room actually gobs of room compared to the other method to pull out the AC Condenser fan or the Radiator fan. Just be sure to unhook any clips and remove the mount bolts that hold the fans to the radiator. I chose to drain just a little antifreeze from the bottom just to keep from any spilling over at the top. This worked so easily and quickly. I highly recommend doing it this way. Then put it all together and top off with a little antifreeze.

    So overall this fan works great, but if you want it to fit right in and be just like the OEM this is not the one.

    Pros: Works, Mounts to radiator just fine.

    Cons: Placement of radiator overflow reservoir mount hole and other mount hole in wrong location.

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
    This part DOES NOT fit your selected vehicle.
    1996 Chrysler Sebring 2.0L MFI DOHC 4cyl
    This part fits your vehicle(s):
    Browse to find other vehicles this part fits:





    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy


    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details


    Buy Online, Return
    Get More Details


    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods: