Dayco Serpentine Belt E050274 - Read Reviews on Dayco Serpentine #E050274

Dayco Serpentine Belt

Vehicle Specific

Part Number: E050274
Features & Benefits

Dayco® ela™ (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. Vehicles that are manufactured with stretch belts must replace them with stretch belts and are not interchangeable with standard constructed belts of their same size. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco® provides detailed instructions on the reverse side of the sleeve.

  • Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
  • Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
  • Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
  • These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt
Product Details
Part Number: E050274
Weight: 0.26lbs
Belt Construction: K-Section
Belt Free Length (in): 27.4
Belt Free Length (mm): 695.96
Belt Material: EPDM
Rib Count: 5
SAE Standards: SAE J1459
Temperature Range Maximum (°F): 212
Temperature Range Minimum (°F): -45
Top Width (in): 0.68
Top Width (mm): 17.271999
Type: Serpentine Belt
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall

    Please wait while we process your request

    Please wait while we retrieve the user's information


    Your bio is currently empty. Now is a great time to fill in your profile.


    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.


    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Dayco Serpentine Belt


    Sort by:

    1 review

    Please wait while we perform your request.

    Please wait while we perform your request.

    This review is hidden because you have chosen to ignore Member 2957605004. Show DetailsHide Details

    Belt doesn't function

    I have a '09 Mazda 3S and I purchased this belt to replace it since I had 100K miles on the old one. Little did I know that the AC pulley in my car is fixed and cannot be adjusted. (This belt is designed to stretch like a rubber band to fit over pulleys.) Well, I was able to stretch the belt and place over the pulleys, but it was too loose to turn the A/C compressor. When I turned on my A/C it would work for a second and then the belt would start squealing terribly because it was too loose.

    This is a manufacturing defect that needs to be fixed. I know it was not just the one belt too because I tried another of the same model number and I still had the same issue.

    I recommend going to dealer for belt until this issue gets resolved. The actual part was very difficult to get onto pulleys, but it does work!

    Pros: Belt fits over pulleys but is too loose

    Cons: Belt is way too loose and squeals horribly with A/C on

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
    Browse to find other vehicles this part fits:





    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy


    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details


    Buy Online, Return
    Get More Details


    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods: