Compressor Works Cooling Fan Control 733652- LeerReseñas sobreCompressor Works #733652

Compressor Works Cooling Fan Control

Varía por vehículo

Número de refacción: 733652
Número alterno de refacción: 226206
Beneficios y Características

Los accesorios de dirección hidráulica TorqFlo proveen un desempeño de enfrimiento mejorado para aplicaciones de vehículos que exceden los requerimientos del equipo original. Los accesorios de enfriamiento PT de TorqFlo reducen la carga térmica proporcionando un desempeño y durabilidad mejorados para remolcado, alta carga útil y ambientes de alta temperatura.

  • Amplia gama de productos para satisfacer cualquier necesidad de enfriamiento del tren de potencia que están diseñados para una fácil instalación.
  • Diseñado y fabricado en instalaciones con certificación de calidad.
  • Con el respaldo de un programa de garantía líder en la industria
  • Se proveen instrucciones de instalación detalladas y existe un servicio de asistencia técnica 1-800 disponible.
Detalles del producto
Número de refacción: 733652
Peso: 0.45lb
Notas: Preset Fan Controller
Certificado por CSA: No
Color/acabado de la caja de aire: Negro
Listado ETL: No
Para interiores/exteriores: Interior / exterior
Amperaje máximo (A): 25
Número de configuraciones: único
Contenido del paquete: Controlador y kit de instalación
Control de configuración: Mecánico.
Voltaje: 12
Información de envío: La entrega al día siguiente y el envío en dos días no están disponibles para los apartados postales, APO/FPO/DPO o direcciones en territorios de los Estados Unidos.
El proveedor puede enviar este producto directamente a cualquier dirección elegible en los EE. UU., excepto APO/FPO/DPO o a direcciones en territorios de los EE. UU.
  • Total
     

    Please wait while we process your request
     

    Please wait while we retrieve the user's information

    Bio

    Your bio is currently empty. Now is a great time to fill in your profile.

    Rank

    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.

    pluck_user_recommend_permission

    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Compressor Works Cooling Fan Control

    Filter

    Sort by:

    1 review


    Please wait while we perform your request.

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Joe Sunoco. Show DetailsHide Details

    All you need to get it done

    I'm a retired/experienced mechanic and not the first time I've used this kit. I first used one on an 83 Mustang to replace the factory setup that was not working right and it worked perfect..
    Recently I picked up a V6 Mazda (Ford Ranger) pickup and some backyard mech. talked the p.o. into taking out the factory belt driven fan and installed a decent Hayden electric fan but did a horrible job installing the temp control and had wires all over. Also, they installed the sensor probe at the very top of the radiator fins, above the reg. water line, so it didn't go on until it was running TOO Hot.
    Not to take a chance I bought this kit right away, installed it right (BTW, instructions are easy to understand) put all the wires in some plastic loom so it looks like factory. Works Great ! Goes on about mid range on my factory gauge and keeps it there. For a stock car or truck DON'T bother with the higher priced adjustable ones, they don't last as well.. Good Luck !

    Pros: Works Great! Includes fused wiring & all you need! Relatively easy to install, well thought out!

    Cons: none

    P1050440 - Copy

    My little Mazda..

    GLX

    My 83 Mustang

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
     
    Navega para encontrar otros vehículos a los que les queda esta refacción: