Ford Explorer Engine Control Computer

Replacement Parts

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!
Your Current Location: 5601 VINE ST - PHILADELPHIA, PA 19139 - Store Info
CLOSE

Tell Us More About Your Ford Explorer. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

When it comes to style, versatility and safety, your Ford Explorer is second to none. Getting the most out of your SUV means making sure your engine control computer isn't malfunctioning and keeping your Explorer from starting right away. Replace your current one with a new Ford Explorer engine control module from AutoZone today.

Show of 119  Results
View:
  •  | Page 1 of 10 |  
  • Part Number: 78-6139
  • Warranty: 1 YR
  • Notes: O.E.M. #F5TF-AA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-5512
  • Warranty: 1 YR
  • Application: With automatic transmission
    With Federal emission
  • Notes: O.E.M. #F37F-ZB. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-2112F
  • Warranty: 1 YR
  • Application: With California emission
  • Notes: Units must be flashed ON the vehicle. Vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. With Module #VK2-L2633. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-5385
  • Warranty: 1 YR
  • Application: With automatic transmission
    With California emission
  • Notes: ID #F37F-ANA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6150
  • Warranty: 1 YR
  • Notes: O.E.M. #F5TF-ARB. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-2111F
  • Warranty: 1 YR
  • Application: Without California emission
  • Notes: Units must be flashed ON the vehicle. Vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. With Module #VK2-L2634. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-9057
  • Warranty: 1 YR
  • Notes: Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed. ID #F5PF-BRA
  • Part Number: 78-5089
  • Warranty: 1 YR
  • Notes: O.E.M. #F07F-VA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-8422F
  • Warranty: 1 YR
  • Notes: Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. With Module #ML2-405. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-8443F
  • Warranty: 1 YR
  • Notes: Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. With Module #ML2-841. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-8603F
  • Warranty: 1 YR
  • Notes: Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. With Module #NCD-250. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-1239F
  • Warranty: 1 YR
  • Notes: All Calibrations With Module ID #8L2A-12B684-AA. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  •  | Page 1 of 10 |  

Non-mechanical issues are difficult to diagnose and often more frightening than visible problems. When your engine control unit malfunctions, your check engine light constantly stays on and you have issues automatically shifting gears. A new Explorer engine control computer is ready for you to pick up at AutoZone, where you find nothing but quality, affordable replacement auto parts. Providing the right products at the right prices is how AutoZone helps you keep your Explorer in tip-top shape for the foreseeable future.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo