Ford Ranger Engine Control Computer

Replacement Parts

Your Current Location: 5601 VINE ST - PHILADELPHIA, PA 19139 - Store Info
CLOSE

Tell Us More About Your Ford Ranger. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Fun, affordable and full of no-nonsense utility, your Ford Ranger is the pickup you depend on for work and play. Make sure your easy-to-handle truck keeps going the distance by replacing its broken down computer with a new reliable Ford Ranger engine control module from AutoZone.

Show of 337  Results
View:
  •  | Page 1 of 29 |  
  • Part Number: 78-4417
  • Warranty: 1 YR
  • Application: With automatic transmission
    With Federal emission
  • Notes: O.E.M. #F0TF-BHA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-8469F
  • Warranty: 1 YR
  • Notes: Flash programming included in price. With module #ML2-832, 832A. PATS Module Requires Programming after ECM Install. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required.
  • Part Number: 78-8706
  • Warranty: 1 YR
  • Notes: With calibration #9B1A-BA. With Tear Tag RRHx. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-4465
  • Warranty: 1 YR
  • Application: With automatic transmission
  • Notes: Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6618
  • Warranty: 1 YR
  • Notes: With calibration #5-56H. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-8706
  • Warranty: 1 YR
  • Notes: With calibration #9B1A-BA. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6620
  • Warranty: 1 YR
  • Notes: With calibration #5-56S. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-4930
  • Warranty: 1 YR
  • Application: With manual transmission
  • Notes: ID #F07F-AB. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-4386
  • Warranty: 1 YR
  • Application: With automatic transmission
    With California emission
  • Notes: Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6618
  • Warranty: 1 YR
  • Notes: Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. With Calibration #6-56H.
  • Part Number: 78-6615
  • Warranty: 1 YR
  • Notes: With calibration #5-55R. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6613
  • Warranty: 1 YR
  • Notes: With calibration #5-55F. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  •  | Page 1 of 29 |  

Your ECM for Ford Ranger controls numerous, essential systems in your truck. Reduced emissions, ideal fuel mixture, easy ignition and variable cam timing all rely on a properly functioning ECM. The Ranger engine control computer is designed to work seamlessly with your truck's sensors for maximum efficiency and performance. Visit an AutoZone near you and experience the difference of friendly, expert service. We offer a huge selection of products at outstanding prices. Enjoy free battery charging, engine diagnostic testing and our handy Loan-a-Tool Program.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

Core return policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

Free shipping policy

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

${returnanywherealttext}

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Same day store pickup
Payment Methods:
 
label.common.footer.alt.autozoneLogo