Lincoln Navigator Engine Control Computer

Replacement Parts

 

AutoZone® Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

Tell Us More About Your Lincoln Navigator. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Your full-sized luxury vehicle is equipped with a twin turbocharged engine that gets excellent gas mileage for thousands of miles and counting. Don't forget to replace your Lincoln Navigator engine control module to take full advantage of your vehicle's EcoBoost technology.

Show of 20  Results
View:
  •  | Page 1 of 2 |  
  • Part Number: 78-8491F-UNF
  • Application: Unflashed
  • Notes: Unit sold unflashed
    With Module #MLC-496, 496A. Flash units require programming specific to the vehicle. Accurate VIN and mileage are required. Additional vehicle specific on-car programming may need to be performed after installation to prevent drivability and starting issues
  • Part Number: 78-1208F
  • Notes: All Calibrations with Module ID #9C2A-12B684-AB, AC, AD, CA. Unit may require additional programming either ON or OFF the vehicle. Units must be flashed ON the vehicle. Vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  • Part Number: 78-1247F
  • Notes: All Calibrations with Module ID #BR3A-12B684-CB, cc. Unit may require additional programming either ON or OFF the vehicle. Units must be flashed ON the vehicle. Vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  • Part Number: 78-1058F
  • Notes: Flash Programming included in Price. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required. With Module #HPC-311. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-1113F
  • Notes: Flash Programming included in Price. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required. With Module #MG3-L1711. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-8747
  • Notes: OEM #F85F-YA, YB. With calibration #8-46U. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-8452F
  • Notes: Flash programming included in price. With module #MLC-211. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  • Part Number: 78-2115F
  • Notes: Flash programming included in price. All calibrations with module ID #BG3-L1731. Customer-specific parameters such as courtesy light timing, etc. ; may need to be reset after ECM is re-installed. Flash units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required.
  • Part Number: 78-1208F
  • Notes: All Calibrations with Module ID #9C2A-12B684-AB, AC, AD, CA. Unit may require additional programming either ON or OFF the vehicle. Units must be flashed ON the vehicle. Vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  • Part Number: 78-2118F
  • Notes: Flash Programming included in Price. All Calibrations With Module ID #BG3-L1721. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-1136F
  • Notes: Flash Programming included in Price. PATS Module Requires Programming after ECM Install. With Module #MN2-L361N'Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  • Part Number: 78-8491FF
  • Application: Flashed
  • Notes: With Module #MLC-496, 496A. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Additional vehicle specific on-car programming must be performed AFTER installation to prevent drivability and starting issues.
  •  | Page 1 of 2 |  

Even a luxury vehicle needs to be kept equipped with quality parts for it to function properly. That's why you need to get regular repairs and keep track of any and all chronic and random performance issues that you may experience when driving. Don't forget to keep a good eye on your vehicle's engine control module to prevent your vehicle's fuel mileage and performance from going down in history. And remember to periodically replace your ECM with a new ECM for Lincoln Navigator from AutoZone.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

Core return policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

Free shipping policy

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

${returnanywherealttext}

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Same day store pickup
Payment Methods:
 
label.common.footer.alt.autozoneLogo