//bottom ads

Mercury Sable Engine Control Computer

Replacement Parts

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

Tell Us More About Your Mercury Sable. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

With 1,000 pounds of towing force at over 250 horsepower, your Sable performs more like a truck than the midsize car it is. Don't let a minor electrical issue take control of your power. Instead, install the aftermarket Sable engine control computer from AutoZone to recalibrate those critical engine components.

Show of 122  Results
View:
  •  | Page 1 of 11 |  
  • Part Number: 78-8574F-UNF
  • Application: Unflashed
  • Notes: Unit sold unflashed
    With Module #MP2-2B3. Flash units require programming specific to the vehicle. Accurate VIN and mileage are required. Additional vehicle specific on-car programming may need to be performed after installation to prevent drivability and starting issues
  • Part Number: 78-4568
  • Application: Except Canada emission
  • Notes: ID #E6DF-HD. Unit may require additional programming either ON or OFF the vehicle. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-1045F
  • Notes: Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation with no further programming required. With Module #HBO-422. Customer-specific parameters such as courtesy light timing, among others, may need to be reset after ECM is re-installed.
  • Part Number: 78-6986
  • Notes: With calibration #7-14A. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-4567
  • Application: Except Canada emission
  • Notes: ID #E6DF-HC. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-5522
  • Application: With California emission
  • Notes: OEM #F3DF-BB, BC, BD. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6103
  • Notes: O.E.M. #F5DF-GB. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-4407
  • Application: Canada emission
  • Notes: O.E.M. #E9DF-EA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-5166
  • Application: With Federal emission
  • Notes: O.E.M. #F2OF-HA. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-5167
  • Application: With Federal emission
  • Notes: OEM #F2OF-HB, HC. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-6976
  • Notes: With calibration #7-10A. With Tear Tag KQQ1/KQQ2/YHE0. Emission Calibration/Tear Tag On Front Door Jams, in Trunk, or Under Hood. Customer-specific parameters such as courtesy light timing, etc. May need to be reset after ECM is re-installed. Units are pre-programmed at the factory and ready for installation with no further programming required.
  • Part Number: 78-8387F
  • Notes: With module #ML2-301. Customer-specific parameters such as courtesy light timing, etc may need to be reset after ECM is re-installed. Flash Units require programming specific to the vehicle prior to shipping. Accurate VIN and mileage are required. Delivered units are ready for installation With no further programming required.
  •  | Page 1 of 11 |  

Your on-board computer is a highly-specialized component that regulates engine output via a series of high-tech sensors. An illuminated check engine light is the first sign that your calibrations are off, and you soon begin to feel jerks in your transmission as your fuel consumption rate steadily declines. Your ECM for Mercury Sable effectively balances this system by closely monitoring fuel intake and ignition timing. It gives you more power and prevents an overconsumption of fuel. Plus, with Same Day Store Pickup, AutoZone makes upgrading easy and affordable.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo