Performance

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

Tell Us More About Your Chevrolet El Camino. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Your two door pick-up is one unique vehicle. Its long body style distinguishes it from all other pickups on the road. Make your vehicle stand out from all other even more with an aftermarket Chevrolet El Camino exhaust header from AutoZone.

Show of 36  Results
View:
  •  | Page 1 of 3 |  
  • Part Number: 11114FLT
  • Notes: Standard Header Primary Tube Collector Size 1.5x2.5"; Shorty-Style; Modify Stock exhaust to retain catalytic converter. Fitting for exhaust temperature sensor welded. If Needed; Hole Can Be Drilled In Tube
  • Part Number: 31114FLT
  • Notes: Primary Tube Collector Size 1.5x2.5"; Shorty-Style; Modify Stock exhaust to retain catalytic converter. Fitting for exhaust temperature sensor welded. If Needed; Hole Can Be Drilled In Tube
  • Part Number: H8047
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 3" collector. Fits D-Port cylinder heads including ZZ4 crate engines. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Oval port shape. 1 5/8" primary tube. Requires removal or modification of locking steering columns if equipped. Column and floor transmission shift. Will fit most angle plug heads including factory Chevrolet Bow-Tie heads.
  • Part Number: H8047-1
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. 3" collector. Fits D-Port cylinder heads including ZZ4 crate engines. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Oval port shape. 1 5/8" primary tube. Requires removal or modification of locking steering columns if equipped. Column and floor transmission shift. Will fit most angle plug heads including factory Chevrolet Bow-Tie heads.
  • Part Number: H8056
  • Application: With manual transmission
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 3" collector. Floor transmission shift. Will fit most angle plug heads including factory Chevrolet bow-tie heads. Fits D-Port cylinder heads including ZZ4 crate engines. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Must use non-shell type motor mounts. Oval port shape. 1 5/8" primary tube. Requires removal or modification of locking steering columns if equipped. Shorty design for maximum ground clearance.
  • Part Number: H8021-1
  • Application: With automatic transmission
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. 3" collector. Fits most angle plug heads. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Round port shape. 1 5/8" primary tube. Shorty design for maximum ground clearance. Column and floor transmission shift. Will not fit with Saginaw close ratio 825 steering box.
  • Part Number: H8024-1
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. 3 1/2" collector. Same as port shape. 1 7/8" primary tube. Column and floor transmission shift.
  • Part Number: H8012-1
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Same as port shape. 1 3/4" primary tube. 3" collector. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. Not recommended for generation six 502 cid engines with aluminum heads. Shorty design for maximum ground clearance. Will not fit with Saginaw close ratio 825 steering box.
  • Part Number: H8021
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 3" collector. Fits most angle plug heads. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Round port shape. 1 5/8" primary tube. Shorty design for maximum ground clearance. Column and floor transmission shift. Will not fit with Saginaw close ratio 825 steering box.
  • Part Number: H8024
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. 3 1/2" collector. Same as port shape. 1 7/8" primary tube. Column and floor transmission shift.
  • Part Number: H8013
  • Application: With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. 3" collector. Not recommended for generation six 502cid engines with aluminum heads. Same as port shape. 1 7/8" primary tube. Shorty design for maximum ground clearance. Floor transmission shift. Will not fit with Saginaw close ratio 825 steering box.
  • Part Number: H8026-1
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. 3 1/2" collector. Same as port shape. 2" primary tube. Column and floor transmission shift.
  •  | Page 1 of 3 |  

One thing that your pick-up should be without is an aftermarket exhaust header for Chevy El Camino from us. Made from superior quality materials that are more durable and long lasting than many others, your new exhaust tubes distribute a higher amount of air to the engine so that it burns gas more efficiently and generates a higher torque for a more powerful performance. Browse AutoZone's top-notch online assortment and enjoy our convenient Same Day Store Pickup option.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo