Performance

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

Tell Us More About Your Chevrolet K10. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Whether you own the long or short bed version of the Chevrolet K10, no one is disputing the fact that your vehicle works harder and longer than any other vehicle on your lock. Install an aftermarket Chevrolet K10 exhaust header from AutoZone to give it more power so it continues to put all other vehicles in your neighborhood to shame.

Show of 13  Results
View:
  •  | Page 1 of 2 |  
  • Part Number: 31500FLT
  • Notes: Primary Tube Collector Size 1.5x3"; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. May Require Clutch Linkage Modification; Does Not Fit with Angle Plug Heads; Require air conditioner Bracket PN[10042FLT]
  • Part Number: 31530FLT
  • Notes: Primary Tube Collector Size 1.75x3"; Modify Stock exhaust to retain catalytic converter. Must Use Original Factory Big Block Engine Frame Mounts and Hardware
  • Part Number: 11500FLT
  • Notes: Standard Header Primary Tube Collector Size 1.5x3"; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. May Require Clutch Linkage Modification; Does Not Fit with Angle Plug Heads; Must Remove The Rubber Stopper Below The Starter; Require air conditioner Bracket PN[10042FLT]; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange; With oxygen sensor - Use Reducer PN[10110FLT] For 3" Flange
  • Part Number: 31506FLT
  • Notes: Primary Tube Collector Size 1 5/8x2.5"; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. Must Remove The Rubber Stopper Below The Starter; Require air conditioner Bracket PN[10042FLT]; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange
  • Part Number: 49152-1FLT
  • Notes: Afterburner Headers. Ceramic; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. May Require Clutch Linkage Modification; Require air conditioner Bracket PN[10042FLT]; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange; With oxygen sensor - Use Reducer PN[10110FLT] For 3" Flange
  • Part Number: 11500SFLT
  • Notes: Standard Header Primary Tube Collector Size 1.5x3"; With AIR Injection Manifold Welded In; Modify Stock exhaust to retain catalytic converter. Require air conditioner Bracket PN[10042FLT]; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange; With oxygen sensor - Use Reducer PN[10110FLT] For 3" Flange
  • Part Number: 11506FLT
  • Notes: Standard Header Primary Tube Collector Size 1 5/8x2.5"; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. Must Remove The Rubber Stopper Below The Starter; Require air conditioner Bracket PN[10042FLT]; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange
  • Part Number: 49152FLT
  • Notes: Afterburner Headers. Standard; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. May Require Clutch Linkage Modification; Must Remove The Rubber Stopper Below The Starter; With oxygen Sensor - Use Reducer PN[10105FLT] For 2.5" Flange; With oxygen sensor - Use Reducer PN[10110FLT] For 3" Flange
  • Part Number: 11530FLT
  • Notes: Standard Header Primary Tube Collector Size 1.75x3"; Without AIR Tubes; Modify Stock exhaust to retain catalytic converter. Must Use Original Factory Big Block Engine Frame Mounts and Hardware
  • Part Number: 11510FLT
  • Notes: Standard Header Primary Tube Collector Size 1.5x2.5"; Modify Stock exhaust to retain catalytic converter
  • Part Number: 1830S-6JS
  • Application: Without air injection
  • Notes: Silver ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 5/8". Quantity per car: 5. Cat4Ward Shorty Header
  • Part Number: 1830S-6JT
  • Application: Cab and Pickup
    Without air injection
  • Notes: Titanium ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 5/8". Quantity per car: 5. Cat4Ward Shorty Header
  •  | Page 1 of 2 |  

Sometimes, it's better for you to unlock your vehicle's potential than it is for you to leave it as is. OEM parts are designed to last for so long and give your vehicle an average performance. Break the mold and see what your vehicle is capable of by ordering an exhaust header for Chevrolet K10 from AutoZone. Our Free Shipping on online purchases of $75 or more and Loan-a-Tool program save you money and time while you upgrade your vehicle so it performs to the max.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo