Performance

Tell Us More About Your Chevrolet S10. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Small-scale utility is a lot better with unrestricted power, and AutoZone gives S-10 drivers an easy way to unleash extra torque. Upgrade your manifold with our high-performance exhaust header for Chevrolet S-10 and let your engine breathe easy even when you're loaded down.

Show of 10  Results
View:
  •  | Page 1 of 1 |  
  • Part Number: 11502FLT
  • Notes: Standard; primary tube collector size 1.5x2.5"; Without AIR Tubes; For Engine 283-400 Swap; Modify stock exhaust to retain catalytic converter; Not legal for street use.
  • Part Number: 31502FLT
  • Notes: Primary tube collector size 1.5X2.5". Without air tubes. For engine 283-400 swap. Modify stock exhaust to retain catalytic converter. Not legal for street use.
  • Part Number: H8073
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. Engine swap. Shorty design for maximum ground clearance. Column transmission shift. Check motor mount position before ordering. 2 1/2" collector. LS1/LS6 engine. Must use 66 1/2 or later frame brackets (approx. 1 in. Higher than 65 and early 66 style). Same as port shape. 1 1/2" primary tube. Reducers provided with welded O2 bungs.
  • Part Number: H8073-1
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Engine swap. Shorty design for maximum ground clearance. Column transmission shift. Check motor mount position before ordering. 2 1/2" collector. LS1/LS6 engine. Must use 66 1/2 or later frame brackets (approx. 1 in. Higher than 65 and early 66 style). Same as port shape. 1 1/2" primary tube. Reducers provided with welded O2 bungs.
  • Part Number: 1840S-4JT
  • Notes: Titanium ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  • Part Number: 1840S-4
  • Notes: Stainless steel
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  • Part Number: 1842S-5JT
  • Application: With air injection
  • Notes: Titanium ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  • Part Number: 1840S-4JS
  • Notes: Silver ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  • Part Number: 1842S-5JS
  • Application: With air injection
  • Notes: Silver ceramic
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  • Part Number: 1842S-5
  • Application: With air injection
  • Notes: Stainless steel
    This Product has been granted a California Air Resources Board (CARB) "E.O" (Executive Order) Exemption, or is considered a Direct Replacement or Consolidated Replacement part. It is 50 State Legal when installed on the appropriate vehicle per the Manufacturer Application guide and Installation Instructions. D-57-29. Tube size: 1 1/2". Quantity per car: 6. Cat4Ward Shorty Header
  •  | Page 1 of 1 |  

The air in your exhaust line is just as critical as the air entering your cylinders, and our Chevrolet S-10 exhaust header keeps the pressure balance right on point. Factory manifolds tend to degrade over time, especially when exposed to regular moisture and jobsite debris, but S-10 exhaust headers from AutoZone are built with a high-strength casing. The extra-long tubing system lowers pressure at the end of your line, which means more horsepower and torque wherever you drive. Order online for Same Day Store Pickup, or bundle your upgrade with Free Shipping on purchases of $75 or more.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

Core return policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

Free shipping policy

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

${returnanywherealttext}

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Same day store pickup
Payment Methods:
 
label.common.footer.alt.autozoneLogo