Performance

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

Tell Us More About Your Ford Falcon. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Although traveling back to the ‘60s is out of the question, your Falcon is a living memory of good times long gone. Put a little spirit back into your classic Ford with one of AutoZone's Falcon exhaust headers.

Show of 13  Results
View:
  •  | Page 1 of 2 |  
  • Part Number: 12103FLT
  • Notes: Shorty Headers 1 5/8" Primary With 2.5" Collector; Painted Black
  • Part Number: 32100FLT
  • Notes: Primary Tube Collector Size 1.5x3". Can Be Modified To Fit AIR Fittings In Head; Will Not Fit C6 Transmission Power Steering Equipped
  • Part Number: 32103FLT
  • Notes: Shorty Headers 1 5/8" Primary With 2.5" Collector; Ceramic
  • Part Number: 12100FLT
  • Notes: Standard Header. Primary Tube Collector Size 1.5x3". Can Be Modified To Fit AIR Fittings In Head; Will Not Fit C5 Transmission Power Steering Equipped
  • Part Number: H8403-1
  • Application: With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. 3" collector. Installation requires power steering bracket PN H7609. Same as port shape. 1 5/8" primary tube. Column and floor transmission shift.
  • Part Number: H8403
  • Application: With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 3" collector. Installation requires power steering bracket PN H7609. Same as port shape. 1 5/8" primary tube. Column and floor transmission shift.
  • Part Number: D660YA-R
  • Application: With automatic transmission
    With A/C
  • Notes: Raw
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Primary tube 1 5/8" - 2". Port shape SAP. Collector 2 1/2". Emissions code: The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards). Y indicates Tri-Y design. Will not fit models with air injection cylinder heads. Will not fit new cast iron Ford Dart engine blocks.
  • Part Number: D660YA
  • Application: With automatic transmission
    With A/C
  • Notes: Ceramic coated
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Primary tube 1 5/8" - 2". Port shape SAP. Collector 2 1/2". Emissions code: The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards). Y indicates Tri-Y design. Will not fit models with air injection cylinder heads. Will not fit new cast iron Ford Dart engine blocks.
  • Part Number: D660YS-R
  • Application: With manual transmission
    With A/C
  • Notes: Raw
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Primary tube 1 5/8" - 2". Port shape SAP. Collector 2 1/2". Emissions code: The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards). Y indicates Tri-Y design. Will not fit models with air injection cylinder heads. Will not fit new cast iron Ford Dart engine blocks.
  • Part Number: D660YS
  • Application: With manual transmission
    With A/C
  • Notes: Ceramic coated
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Primary tube 1 5/8" - 2". Port shape SAP. Collector 2 1/2". Emissions code: The product accompanying this document is legal only for off-highway use (except in California or states that have adopted California emission standards). Y indicates Tri-Y design. Will not fit models with air injection cylinder heads. Will not fit new cast iron Ford Dart engine blocks.
  • Part Number: 1615S
  • Notes: Stainless steel
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Installation requires welding/modification to exhaust system. Tube size: 1 5/8". Universal. Quantity per car: 2. Cat4Ward Shorty Header
  • Part Number: 1615SJT
  • Notes: Titanium ceramic
    This product is Legal for use on 1974 and older non catalyst equipped vehicles and is considered a "replacement part" per California Air Resources Board regulations, as long as ALL emissions sensitive components are retained, including AIR, EGR, Heat Risers etc. Failure to retain any of these components, or use on any 1975 or newer catalytic converter equipped car would render this product Illegal for Street or Off Highway Use in California, or in states that have adopted California Emissions regulations and may only be used for Closed Course Competition. Direct replacement for factory manifold, installation hardware kit included. Installation requires welding/modification to exhaust system. Tube size: 1 5/8". Universal. Quantity per car: 2. Cat4Ward Shorty Header
  •  | Page 1 of 2 |  

Breathing is just as essential for a car as it is for a human, and it works much the same way: cool air in, warm air out. Drivers notice a performance boost after switching out their exhaust header for Ford Falcon. Conveniently add a few horsepower with Same Day Store Pickup or home shipping when you shop online with AutoZone. We're providing the right products at the right prices so you can rest assured that you're scoring the best deals in the industry when you order from us.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo