Performance

 

AutoZone Rewards℠

Join Today and Earn a $20 Reward When You Make 5 Purchases of $20 or More!

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Show of 97  Results
View:
  •  | Page 1 of 9 |  
  • Part Number: H8101
  • Part Number: H8426
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 2 1/2" collector. Column and floor transmission shift. Fits with using 10" or 10 1/2". Clutch only. Installation requires power steering bracket PN H7609. Non-HiPo cars may need header clearance for clutch linkage. Oval port shape. 1 1/2"-1 3/4" primary tube. Replica of early Shelby Tri-Y header. Requires additional driver's side header clearance around the steering box.
  • Part Number: H8021
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 3" collector. Fits most angle plug heads. Installation requires left side A/C bracket part number H7608.1979 and later vehicles with short compressors can use the stock bracket. Round port shape. 1 5/8" primary tube. Shorty design for maximum ground clearance. Column and floor transmission shift. Will not fit with Saginaw close ratio 825 steering box.
  • Part Number: H8101-1
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Same as port shape. 1 3/4" primary tube. 3" collector.
  • Part Number: H8051
  • Part Number: H4803
  • Application: With manual transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 2" collector. Oval port shape. 1 1/4" primary tube. Floor transmission shift.
  • Part Number: H8207-1
  • Application: With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. 3" collector. Same as port shape. 1 7/8" primary tube. Column and floor transmission shift. Will not fit models equipped with air injection pump without modification.
  • Part Number: H8433
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. Oval port shape. 1 5/8" primary tube. 3" collector. Fits with using 85-95 bellhousings with cable clutch kits. Header installation requires the use of the 1965-1966 non Hi-Po V8 clutch equalizer bar. Lakewood bell housings require clearance for header tubes. Must use 66 1/2 or later frame brackets (approximately 1" higher than 65 and early 66 style). Shorty design for maximum ground clearance. Use recommended export brace if shock mount center to center dimension is less than 33 3/4".
  • Part Number: H8051-1
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. Engine swap. 2 1/2" collector Does not fit angle plug heads. Must replace the stock oil pan with a Canton 16-100 two piece or 16-100T one piece style rear main seal. Must use stealth or equivalent motor mount kit. Round port shape. 1 1/2" primary tube. Column and floor transmission shift.
  • Part Number: H8059
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. 2 1/2" collector. Header equipped with a fitting to accept stock O2 sensor. Long tube headers for off-road racing use only. Same as port shape. 1 5/8" primary tube. Column transmission shift.
  • Part Number: H8059-1
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Ceramic coated finish. 2 1/2" collector. Header equipped with a fitting to accept stock O2 sensor. Long tube headers for off-road racing use only. Same as port shape. 1 5/8" primary tube. Column transmission shift.
  • Part Number: H8013
  • Application: With automatic transmission
    With A/C
  • Notes: ***Not for sale in California*** This product is not legal for Street or Off Highway use in California or in states that have adopted California Emissions Regulations. This product is only intended for Closed Course Competition use, except 1965 and Older US manufactured California Certified vehicles, 1967 or older US manufactured Federally Certified vehicles, or 1967 and older Foreign manufactured vehicles which may have any aftermarket add-on or modified part installed as long as the vehicle can still meet the tailpipe emission standards for the year of the vehicle and retain any original or retrofit crankcase control (PCV) devices and NOx device required for the year of the vehicle. Raw finish. Big block frame stands and motor mounts must be used to insure proper engine location and header fit. 3" collector. Not recommended for generation six 502cid engines with aluminum heads. Same as port shape. 1 7/8" primary tube. Shorty design for maximum ground clearance. Floor transmission shift. Will not fit with Saginaw close ratio 825 steering box.
  •  | Page 1 of 9 |  

Other Customers Also Viewed

HELP FOR YOUR VEHICLE

VIDEO LIBRARY

Video Library

Videos for car repairs, auto parts and products.
See Details

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Payment Methods:
 
label.common.footer.alt.autozoneLogo