GP Sorensen Fuel Injector 800-1853N - Read 1 Reviews on GP Sorensen #800-1853N

GP Sorensen Fuel Injector

Vehicle Specific

Part Number: 800-1853N
Features & Benefits

As a global manufacturer of original equipment and after market fuel injection products, complete quality control is maintained through the manufacturing process from component to finished product.

  • Our flow matched injectors promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions
  • Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
  • Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp viton o-rings enable prolonged sealing of injector under extreme heat conditions
Product Details
Part Number: 800-1853N
Weight: 0.25lbs
Fuel Injector O-Rings Included: 2
Fuel Injector Type: TBI (Single Point or Throttle Body Injection)
Injector Plug Type: TBI Injector
Item Grade: OEM Standard
Package Contents: 1 per Box; Includes Caution Sheet
Package Quantity: 1
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall

    Please wait while we process your request

    Please wait while we retrieve the user's information


    Your bio is currently empty. Now is a great time to fill in your profile.


    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.


    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    GP Sorensen/Fuel Injector


    Sort by:

    1 review

    Please wait while we perform your request.

    Please wait while we perform your request.

    This review is hidden because you have chosen to ignore Member 2325710788. Show DetailsHide Details

    So far, working perfectly after 1/2 year of use. Made in Japan!! Yes!

    The injectors I ordered here were made in Japan. Yes! The quality appears to be high. On the 1987 D21, two throttle body injectors are needed. Since the wire colors are the same for both injectors, I recommend color coding the new wires with colored electric tape to match the stock colors, and also making sure the wiring going into the harness connector matches the old order of right and left injectors. The kit comes with wiring terminals which match the original ones. You will need a "butt cheek" crimper to attach the terminals to the wires--cheap ones run around 20$. Old wires press out of the connector easily by working the tabs inside the front openings. Kit also comes with the screens and O-rings on the injectors. I would not be surprised if these were being made by the OE manufacturer. I went with new injectors because it is lots of work to remove the throttle body, and I replaced both injectors even though I only had one bad one. You will also need a throttle body gasket kit. They run around 40$. There is a warranty on these and that means a lot, another reason I went with these over other options. With a Valentine Day online ordering discount, I saved 80$ on the pair over list price and that made the pair a great deal. Didn't find them less expensive anywhere else. Feel very lucky to have these! Thank you Autozone!

    Pros: Both injectors work. Well-packaged. Made in Japan (I consider that good)

    Cons: none at all

    share review Share pluck_abuse_reportAlt Report

    Edited on 8/23/2016 by Editor


    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
    Browse to find other vehicles this part fits:





    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy


    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details


    Buy Online, Return
    Get More Details


    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods: