ACCEL/Wireset - Performance

Vehicle Specific
Part Number: 4041
Features & Benefits

6CYL/8CYL APPLICATIONS. Performance upgrade for 7 mm OE applications, silicone jacket with fiberglass braid EPDM insulation, carbon/graphite suppression core, rated at 450 degrees F. Includes 8 yellow extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal/boot installation on distributor end.

  • Graphite suppression eliminates rfi/emi
  • Provides resistive qualities between 3,000 and 7,000 ohms/ft
  • Tinned copper core
  • Universal fit
Product Details
Part Number: 4041
Weight: 3.0 lbs
Notes: Yellow
Universal Fit Super Stock 8mm Suppression; 90 degree Boots; For Use with Pre and Post HEI Vehicles
Boot Color: Orange
Boot End Angle: 90 degrees
Boot Material: High Temp Silicone
Coil Wire Included: Yes
Distributor / Coil Boot Color: Black
Distributor / Coil Boot Material: High Temp Silicone
Maximum Operating Temperature (°F): 550
RFI Protection: Yes
Vehicle Cylinders: 8
Wire Color: Yellow
Wire Core Material: Stainless steel spiral RFI suppression
Wire Diameter (mm): 8
Wire Insulation: Silicone Insulation
Wire Jacket Material: Silicone
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall
     

    Please wait while we process your request
     

    Please wait while we retrieve the user's information

    Bio

    Your bio is currently empty. Now is a great time to fill in your profile.

    Rank

    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.

    pluck_user_recommend_permission

    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    ACCEL/Wireset - Performance

    Filter

    Sort by:

    1 review


    Please wait while we perform your request.

    Please wait while we perform your request.
    1

    This review is hidden because you have chosen to ignore Member 615102404. Show DetailsHide Details

    not worth the money

    This was a "universal" set. There were two different sets of ends for the distributor ends, both 90 degree ends. A straight end would work better for my use, but not included with the kit. The metal terminals and boots were for a 7mm wire and the wires in this kit were 8mm, as advertised, so the terminals had to be opened up to accept the larger wire and the boots forced on using silicone lube (not supplied). Also the U shaped end that went into the distributor needed to be bent round to fit the holes in the distributor. Not worth the price.

    Pros: none

    Cons: wrong size terminals at distributor side. hard to assemble terminals at distributor side.

    share review Share pluck_abuse_reportAlt Report

    Edited on 7/25/2015 by Editor

    Comment


    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
    These parts DO NOT fit your selected vehicle.
    2007 Chrysler 300 AWD 3.5L MFI SOHC HO 6cyl
    These parts fit your vehicle(s):
    Browse to find other vehicles this part fits:

    OTHER CUSTOMERS ALSO VIEWED

    Buy With Confidence

    ABOUT CORE PARTS

    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy

    Core return policy

    FREE SHIPPING

    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details

    Free shipping policy

    RETURN ANYWHERE

    Buy Online, Return
    Anywhere
    Get More Details

    Return anywhere

    SAME-DAY STORE PICKUP

    Save time by buying online and picking up items in store.
    Learn More

    Same day store pickup
    PAYMENT METHODS 
     
    AutoZone Logo
    • Accounts & Orders
    • Mobile
      • View Mobile Site
      • Get Mobile App
    • Partners