K&N High Performance Cold Air Intake Systems 63-3082 - Read 4 Reviews on K&N High Performance #63-3082

K&N High Performance Cold Air Intake Systems

Vehicle Specific

Part Number: 63-3082

This item cannot be shipped to the following

US State(s), Territory or Military address(es): CALIFORNIA

Features & Benefits

The K&N AirCharger 63-3082 air intake system replaces your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle's engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-3082 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that replaces the factory air box. This allows cooler, denser air to be directed through a custom molded intake tube into the engine's throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and several wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
Product Details
Part Number: 63-3082
Weight: 13.24lbs
Notes: Enter your vehicle information above to see product notes.
Air Box Included: No
Air Filter Element Color: Red
Air Filter Element Material: Cotton Gauze
Air Filter Element Washable: Yes
Air Filter End Cap Color / Finish: Chrome
Air Filter Heat Shield Color / Finish: Black
Air Filter Heat Shield Included: Yes
Air Filter Heat Shield Material: Mild Steel
Air Filter Oil Included: Air Filter Pre-Oiled
Air Filter Outlet Length (in): 1
Air Filter Outlet Shape: Circular
Air Filter Outlet Width (in): 6
Air Filter Overall Height (in): 7.5
Clamp Color / Finish: Natural
Clamp Material: Stainless Steel
Clamp Quantity Included: 5
Clamp Type: Regular
Coupler Color / Finish: Black
Coupler Material: Silicone Rubber
Coupler Quantity Included: 1
Intake Pipe Color / Finish: Black
Intake Pipe Material: High-Density Polyethylene
Intake Pipe Ports: All intake tube ports needed for the specified applications are included
Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required
Vacuum Tubing Included: Yes
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall
     

    Please wait while we process your request
     

    Please wait while we retrieve the user's information

    Bio

    Your bio is currently empty. Now is a great time to fill in your profile.

    Rank

    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.

    pluck_user_recommend_permission

    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    K&N High Performance/Cold Air Intake Systems

    Filter

    Sort by:

    5 reviews


    Please wait while we perform your request.

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 67221741. Show DetailsHide Details

    Great fit

    Was very easy to install, clear instructions. Completed in about 30 minutes.

    Pros: Quick easy install

    Cons: none

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 72214. Show DetailsHide Details

    Great Product

    With a 20% coupon from autozone,it was the lowest price anywhere, fast shipping, I have used K&N intakes before and will use them again.

    Pros: Easy install

    Cons: None

    share review Share pluck_abuse_reportAlt Report

    Edited on 8/24/2016 by Editor

    Comment


    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 2782947550. Show DetailsHide Details

    Great intake system

    Installed on a brand new 2016 Chevy Silverado 1500 and it make it run great and it has great power and was easy to install and my buddy help me install it
    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 2763119214. Show DetailsHide Details

    Well that made a difference

    Installed on a brand new 2016 GMC Sierra 1500 SLE. First gear in the truck was very weak before the install so wanted to give the engine more air. From pulling the truck in to the garage to pulling back out was just about 1 hour. First time ever doing a job like this so i was being extra careful.

    The instructions they provide are extremely accurate and very easy to follow. One spot i deviate slightly was putting the heat shield in. you remove 4 bolts that held the factory tray in place and only use 3 to install the heat shield. I went ahead and put the fourth bolt into the original hole so i kept all the original fastening hardware in the truck.

    Took the truck a couple miles to figure out what was going on (although I could already notice a difference). after about 40 miles the truck had it down and you could really notice what a positive effect the air filter / intake had on the truck.

    granted i installed this with 100 miles on the truck on a 50 mile average i was at 15.3 average MPG after the install now at 247 miles i am at an average of 19.1. you can tell that the truck doesn't work as hard to get to your speed and maintain the speed. It stays in 4 cylinder mode longer as well.

    Noise: it give the truck a great front end growl but does go away pretty quick into the acceleration. Naturally if you want to sustain the cool new sound, an aftermarket exhaust would be your next change. You've now put more air in the engine, you might as well let more air out of the engine. I am partial to Gibson on GMC trucks but magnaflow and flowmaster make great systems.

    Pros: Easy Install, Better Power, Gas Savings, Better Sound, Great Instructions

    Cons: none yet

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 2748985387. Show DetailsHide Details

    Easy to install - Excellent quality - Great sound

    With absolutely no prior mechanical experience, other than changing my windshield wipers, I installed the K&N Cold Air Intake kit on my 2015 Chevy Silverado 5.3L the same day I received it. From watching the YouTube installation video several times prior to receiving the kit, it seemed simple enough that I decided to install it myself, which was very satisfying. In my opinion the instructions that come with the kit were pretty vague, so I do highly suggest watching the video if you are not mechanically inclined. It really was as easy as to install as described. Combined with a Flowmaster American Thunder exhaust system my mechanic installed previously, my truck performs and sounds awesome! It literally GRRROOOWLS!!

    Pros: Easy installation, Excellent product quality, Delivers outstanding results

    Cons: Installation Instructions vague

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
     
    Browse to find other vehicles this part fits:

    RECOMMENDED FOR YOU

    OTHER CUSTOMERS ALSO VIEWED

    BUY WITH CONFIDENCE

    ABOUT CORE PARTS

    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy

    FREE SHIPPING

    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details

    RETURN ANYWHERE

    Buy Online, Return
    Anywhere
    Get More Details

    SAME-DAY STORE PICKUP

    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods:
     
    label.common.footer.alt.autozoneLogo