Herculiner Brush on truck bed coating HCL1B7 - Read 2 Reviews on Herculiner #HCL1B7

Herculiner Truck Bed Coating

Part Number: HCL1B7

This item cannot be shipped to any US State, US Territory or US Military address.

Features & Benefits

Herculiner is the original do-it-yourself brush-on bed liner. It covers with a tough, textured polyurethane coating just like professional spray-on liners. It prevents rust and won t chip, flake or peel. And it isn t just for truck beds. Herculiner can be applied to surfaces such as concrete, plastic, rubber, metal, wood or fiberglass - or just about anywhere a skid resistant surface surface is needed! Do it right...do it yourself...with Herculiner. It s as tough as they come!

  • Tough textured polyurethane protective coating
  • Skid resistant surface - won t chip, flake or peal
  • Prevents rust - bonds and seals all surfaces
  • Resistant to gasoline, oil, solvents and chemicals
Product Details
Part Number: HCL1B7
Weight: 2.50lbs
Application Type: Brush On
Dry to Handle: 12 hours
Dry to Re-Coat: 12 hours
Dry to Touch Time: 3 hours
Package Contents: Roll on truck bed coating
Quantity (fl oz): 37.1
Shelf Life: 2 years
MSDS Information: Click to View
  • Overall
     

    Please wait while we process your request
     

    Please wait while we retrieve the user's information

    Bio

    Your bio is currently empty. Now is a great time to fill in your profile.

    Rank

    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.

    pluck_user_recommend_permission

    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Herculiner/Brush on truck bed coating

    Filter

    Sort by:

    2 reviews


    Please wait while we perform your request.

    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Member 1848695613. Show DetailsHide Details

    Herculiner

    4 of 4 people found this helpful

    I used it on the floor of my 14' aluminum boat to help with slipping.
    It works great & I will have to see how it holds up after time.

    Pros: Works Great With A Cheap.99 Paint Brush.

    Cons: What Ever You Use To Apply It With Needs Thrown Out After Using.

    share review Share pluck_abuse_reportAlt Report

    Edited on 8/10/2015 by Editor

    Comment


    Please wait while we perform your request.
    5

    This review is hidden because you have chosen to ignore Andy Prariedog. Show DetailsHide Details

    Great since MAY 2014

    6 of 6 people found this helpful

    Applied 3 coats to my steel front bumper. Applied it with a simple rough texture 12 inch paint roller I cut into a 3inch width. Sharp lines are possible with painter's tape even after the 3rd coat. I use my bumper as a step to work on my engine. There are no signs of peeling or wear. My truck stays parked outside and absorbs direct sunlight from morning to mid afternoon. The rough texture is the same since applied. The color when applied is shiny black but turns to a dull black. The radiant change was expected as learned from youtube and online forums. Also applied ONE COAT to the steel floor area, steps and pedals of a farm tractor. Obvious wear was seen along the edges of the pedals. All else was still textured and grippy. I will buy again to apply it to my front grill to reenforce it as well as match my bumper.

    Pros: Easily applied with simple paint roller, works well with blue painter's tape, stays rough, won't peel.

    Cons: Forces 1 time use of a paint roller, best to have a few projects in mind to use it all.

    Front Steel Bumper

    3 coats. Bumper used as a step. Chemical...

    share review Share pluck_abuse_reportAlt Report

    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel

    RECOMMENDED FOR YOU

    OTHER CUSTOMERS ALSO VIEWED

    BUY WITH CONFIDENCE

    ABOUT CORE PARTS

    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy

    Core return policy

    FREE SHIPPING

    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details

    Free shipping policy

    RETURN ANYWHERE

    Buy Online, Return
    Anywhere
    Get More Details

    ${returnanywherealttext}

    SAME-DAY STORE PICKUP

    Save time by buying online and picking up items in store.
    Learn More

    Same day store pickup
    Payment Methods:
     
    label.common.footer.alt.autozoneLogo