Chevrolet S10 Crankshaft Kit

Replacement Parts

Your Current Location: 5601 VINE ST - PHILADELPHIA, PA 19139 - Store Info
CLOSE

Tell Us More About Your Chevrolet S10. View all models

AutoZone carries hundreds of thousands of parts and accessories.

Select your Year, Make, Model and Engine to find those that fit your vehicle.

Chevy manufactured the S-10 engine between 1.9 and 4.3 liters, so be sure to choose repair parts that are built for your specific model. Replacing worn-out bearings with AutoZone’s all-inclusive S-10 crankshaft kit is an excellent way to cut down on engine noise and get more life out of your pickup.

Show of 34  Results
View:
  •  | Page 1 of 3 |  
  • Part Number: 11720
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865. This unit will have one balance hole located in the number 1 rod throw and one in the number 6 rod throw.
  • Part Number: 10540
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #817; 245; 85; 2.649" main diameter; With no counterweights in center of crankshaft
  • Part Number: 12720
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865, 8640, 640, 14088640. This unit will have only one balance hole located in either the number 1 or number 6 rod throw or it will not contain any balance holes.
  • Part Number: 10540
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #817; 245; 85; 2.649" main diameter; With no counterweights in center of crankshaft
  • Part Number: 11720P
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit (10/10 grind) includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865. This unit will have one balance hole located in the number 1 rod throw and one in the number 6 rod throw.
  • Part Number: 10550
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #481; 337; 526; 2.649" main diameter; With large full round counterweight between #3 and #4 rod throw that has 7 notches cut to activate magnetic ignition
  • Part Number: 12720
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865, 8640, 640, 14088640. This unit will have only one balance hole located in either the number 1 or number 6 rod throw or it will not contain any balance holes.
  • Part Number: 12720
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865, 8640, 640, 14088640. This unit will have only one balance hole located in either the number 1 or number 6 rod throw or it will not contain any balance holes.
  • Part Number: 12720P
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit (10/10 grind) includes matching main and rod bearings. Casting 480, 865, 5865, 5480, 10055480, 10105865, 8640, 640, 14088640. This unit will have only one balance hole located in either the number 1 or number 6 rod throw or it will not contain any balance holes.
  • Part Number: 21430
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #684; 017; With 2 1/4" snout length; Some cranks for this engine had a large gear that was used to drive the oil pump assembly in cars. Because this gear is not renewable we do not advise reusing these crankshafts in cars.
  • Part Number: 10650
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #337, 481; 526; Used in vehicles with distributor type ignition
  • Part Number: 10340
  • Warranty: 3 months
  • Notes: Remanufactured crankshaft kit includes matching main and rod bearings; Casting #504; 2.495" main diameter; With no counterweights in center of crankshaft
  •  | Page 1 of 3 |  

Engine knocking is a sign that you’ve got an issue with your crankshaft. In a multi-cylinder motor, these components handle a lot of weight, all of which is loaded onto your bearings. The Chevrolet S-10 crankshaft kit from AutoZone features high-strength replacement bearings and brand new rods. Plus, it comes pre-sized for self-installation without the need for balancing equipment. This saves both time and money, and with Same Day Store Pickup when you order from us online, there’s no need to wait. Order your crankshaft kit for Chevrolet S-10 online today and stop by your local store for free battery charging and engine diagnostic testing.

Other Customers Also Viewed

BUY WITH CONFIDENCE

ABOUT CORE PARTS

Buy online and return core parts to the store to be refunded the price.
Core Parts Policy

Core return policy

FREE SHIPPING

On Orders $75 or Greater
and free shipping to APO, FPO, DPO addresses.
Get More Details

Free shipping policy

RETURN ANYWHERE

Buy Online, Return
Anywhere
Get More Details

${returnanywherealttext}

SAME-DAY STORE PICKUP

Save time by buying online and picking up items in store.
Learn More

Same day store pickup
Payment Methods:
 
label.common.footer.alt.autozoneLogo