2007 Jeep Compass

Flywheel

Print

Removal & Installation




CAUTION
Chrysler does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing, and disposing of dust and debris.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transaxle. Refer to Manual or Automatic Transaxle Assembly, removal & installation.
  4.  
  5. Remove clutch pressure plate and disc. Refer to Clutch, Driven Disc & Pressure Plate removal & installation.
  6.  
  7. Remove the 6 flywheel-to-crankshaft bolts and remove the flywheel assembly.
  8.  

To install:

  1. Clean the surfaces of the flywheel and pressure plate to make certain that all oil, grease, and rust have been removed.
  2.  
  3. Install and torque the flywheel-to-crankshaft bolts to 70 ft. lbs. (95 Nm).
  4.  
  5. Install clutch pressure plate and disc. Refer to Clutch, Driven Disc & Pressure Plate removal & installation.
  6.  
  7. Install transaxle assembly. Refer to Manual or Automatic Transaxle Assembly, removal & installation.

    Click image to see an enlarged view

    Fig. Torque sequence for the flywheel bolts

  8.  

 
label.common.footer.alt.autozoneLogo