300, 300C & Magnum 2006-2008, Charger 2006-2008

Oil Pressure Sensor

Print

Removal & Installation



  1. Raise and safely support the vehicle.
  2.  
  3. Position an oil collecting container under switch location.
  4.  
  5. Disconnect electrical connector.
  6.  
  7. Unscrew oil pressure switch.
  8.  

To install:

  1. Apply Mopar® Thread Sealant to the switch threads.
  2.  
  3. Install oil pressure switch to fitting.
  4.  
  5. Connect electrical connector.
  6.  
  7. Lower vehicle.
  8.  
  9. Start engine and check for leaks.
  10.  
  11. Check engine oil level and adjust as necessary.
  12.  

 
label.common.footer.alt.autozoneLogo