300, 300C & Magnum 2006-2008, Charger 2006-2008

Locks & Lock Systems

Print

Power Door Locks



Removal & Installation
Door Lock Switch

NOTE
A battery reconnect procedure must be performed anytime the battery has been disconnected.

  1. Disconnect and isolate the battery negative cable.
  2.  
  3. Remove the door trim panel, as outlined in this section.
  4.  
  5. Using a suitable prytool, or other flat-bladed tool, remove the window/lock switch (2) from the door trim panel.

    Click image to see an enlarged view

    Fig. Using a flat-bladed tool, remove the window/lock switch (2) from the door trim panel

  6.  

To install:

  1. Install the window/lock switch (2) to door trim panel and snap into place.
  2.  
  3. Install the door trim panel, as outlined in this section.
  4.  
  5. Connect battery negative cable
  6.  

 
label.common.footer.alt.autozoneLogo