300, Magnum, 2005

Electric Engine Fan

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Partially drain the cooling system.
  4.  
  5. Remove the upper radiator hose.
  6.  
  7. Detach the cooling fan electrical connector.
  8.  
  9. Remove the cooling fan mounting bolts.
  10.  
  11. Remove radiator cooling fan assembly from vehicle.
  12.  

To install

  1. Position the radiator cooling fan assembly in the vehicle.
  2.  
  3. Install the cooling fan mounting bolts and tighten them to 50 inch lbs. (6 Nm)
  4.  
  5. Attach the cooling fan electrical connector.
  6.  
  7. Install upper radiator hose.
  8.  
  9. Fill the cooling system.
  10.  
  11. Operate the engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels
  12.  

 
label.common.footer.alt.autozoneLogo