300, Magnum, 2005

Flywheel or Flexplate & Ring Gear

Print

Removal & Installation



  1. Remove the transmission.
  2.  
  3. Remove the bolts and flexplate. Remove the backing plate, if equipped.
  4.  

To install:

  1. Position the flexplate (and backing plate, if equipped) onto the crankshaft and install the bolts hand-tight.
  2.  
  3. Apply MOPAR® Lock & Seal Adhesive to the flexplate bolts.
  4.  
  5. Tighten the flexplate retaining bolts, in the order shown in the accompanying illustration, to 70 ft. lbs. (95 Nm).
  6.  
  7. Install the transmission.
  8.  

 
label.common.footer.alt.autozoneLogo