300M, Concorde, Intrepid, LHS, 1998-2004

Crankshaft Damper (Balancer)

Print

Removal & Installation



  1. Disconnect negative battery cable.
  2.  
  3. Remove the accessory drive belt.
  4.  
  5. Raise vehicle on hoist.
  6.  
  7. Remove crankshaft damper bolt.
  8.  
  9. Use Special Tool 1023 puller, and insert 9020-R, remove crankshaft damper.

    Click image to see an enlarged view

    Fig. Removal and installation of the crankshaft damper-2.7L Engine shown

  10.  

To install:

  1. Install crankshaft damper using Special Tools C-4685-C1 (5.9 in.) Bolt, with Nut and Thrust Bearing from 6792, and 6792-1 Installer.
  2.  
  3. Install crankshaft damper bolt. Torque bolt to 70 ft. lbs. (95 Nm) while holding damper with Special Tool 9365.
  4.  
  5. Lower vehicle.
  6.  
  7. Install accessory drive belt.
  8.  
  9. Connect negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo