300M, Concorde, Intrepid, LHS, 1998-2004

Flywheel or Flexplate & Ring Gear

Print

Removal & Installation



  1. Remove the transmission.
  2.  
  3. Remove flex plate attaching bolts.
  4.  
  5. Remove the flex plate.

    Click image to see an enlarged view

    Fig. Removal and installation of the flex plate

  6.  

To install:

  1. Position flex plate with backing plate on the crankshaft.
  2.  
  3. Apply Lock & Seal Adhesive to the flex plate bolts.
  4.  
  5. Install flex plate bolts. Tighten bolts to 70 ft. lbs. (95 Nm).
  6.  
  7. Install the transmission.
  8.  

 
label.common.footer.alt.autozoneLogo