626 1999-2001

Wheel Speed Sensors

Print

Removal & Installation



Front Wheel

Specific to:

Mazda 626 1999-2002

  1. Remove the mud guard.
    NOTE
    The wheel speed sensor is serviceable only as an assembly. Do NOT attempt to service the sensor harness pigtail.

  2.  
  3. Disconnect the wheel speed sensor electrical connector.
  4.  
  5. Remove the fasteners attaching the wheel speed sensor harness.
  6.  
  7. Remove the wheel speed sensor retaining bolts and sensor.
  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

Rear Wheel

Specific to:

Mazda 626 1999-2002

  1. Remove the trunk compartment covering
  2.  
  3. Disconnect the wheel speed sensor electrical connector.
  4.  
  5. Remove the fasteners attaching the wheel speed sensor harness.
  6.  
  7. Remove the wheel speed sensor retaining bolts and sensor.
  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo