626 1999-2001

Diagnosis & Testing

Print

  1. Disconnect the ignition coil connector.
  2.  
  3. Measure the resistance using an ohmmeter as follows:
    1. From terminal A to terminal B, and terminal B to terminal C on 2.0L (FS) models. The resistance should be 0.45-0.55 ohms. If not as specified, replace the ignition coil.
    2.  
    3. From terminal A to terminal D, and terminal B to terminal D on 2.5L (KL) models. The resistance should be 0.45-0.55 ohms.

      Click image to see an enlarged view

      Fig. Ignition coil terminals-2.0L (FS) models



      Click image to see an enlarged view

      Fig. Ignition coil terminals-2.5L (KL) models

    4.  

  4.  

 
label.common.footer.alt.autozoneLogo