626 1999-2001

Ignition Coil

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fresh air duct on 2.0L (FS) models.
  4.  
  5. Unplug the spark plug wire.
  6.  
  7. Unplug the connector, loosen the coil fastener and remove the coil.
  8.  

To install:

  1. Installation is the reverse of removal, tighten the fastener to the specifications shown in the accompanying illustrations.

    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil assembly-2.0L (FS) models



    Click image to see an enlarged view

    Fig. Exploded view of the ignition coil assembly-2.5L (KL) models

  2.  

 
label.common.footer.alt.autozoneLogo