626 1999-2001

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove some of the brake fluid from the master cylinder reservoir.
  4.  
  5. Remove or disconnect the following:

    Wheels
     
    Caliper lower mounting bolt and pivot the caliper up and support it
     
    Brake pads, shims and pin
     

  6.  
  7. Using Mazda tool 49-0221-600C and the old inner brake pad, push the caliper piston into the caliper bore.

    Click image to see an enlarged view

    Fig. Using Mazda tool 49-0221-600C and the old inner brake pad, push the caliper piston into the caliper bore-626

  8.  

To install:

  1. Install or connect the following:

    Brake pads and shims to the caliper support
     
    Caliper over the brake pads
     
    Caliper mounting bolt and torque to 22-28 ft. lbs. (30-41 Nm)
     
    Wheels
     

  2.  
  3. Test the brakes for proper operation.
  4.  

 
label.common.footer.alt.autozoneLogo