626 1999-2001

Locks & Lock Systems

Print

Power Door Locks



Diagnosis & Testing
  1. Inspect for continuity between the door lock switch terminals using an ohmmeter. There should be continuity when the lock is open and 950-1050 ohms resistance when the lock is closed.
  2.  

Removal & Installation
Door Lock Motor

Specific to:

Mazda 626 1999-2002

  1. Disconnect the negative battery cable.
  2.  
  3. Raise the rear edge of the door glass about 3.5 inches from the fully lowered position.
  4.  
  5. Remove the regulator handle if equipped with a manual window.
  6.  
  7. Remove the inner garnish.
  8.  
  9. Remove the screw to remove the inner handle.
  10.  
  11. Turn over the recess cover to remove the screw.
  12.  
  13. Remove the screw.
  14.  
  15. Remove the fasteners.
  16.  
  17. Pull the front door trim to disengage clips from the body.
  18.  
  19. Pull the front door trim upward to disengage hooks B from the body.
  20.  
  21. Disconnect the trunk lid opener switch connector.
  22.  
  23. Disconnect the connector if equipped with a power window.
  24.  
  25. Disconnect the courtesy light.
  26.  
  27. Remove the bracket and inner door handle.
  28.  
  29. Remove the front door screen and lock

    Click image to see an enlarged view

    Fig. Front door lock assembly-626

  30.  

To install:

  1. Installation is the reverse of removal.
  2.  

Door Lock Switch

Specific to:

Mazda 626 1999-2002

  1. Disconnect the negative battery cable.
  2.  
  3. Raise the rear edge of the door glass about 3.5 inches from the fully lowered position.
  4.  
  5. Remove the regulator handle if equipped with a manual window.
  6.  
  7. Remove the inner garnish.
  8.  
  9. Remove the screw to remove the inner handle.
  10.  
  11. Turn over the recess cover to remove the screw.
  12.  
  13. Remove the screw.
  14.  
  15. Remove the fasteners.
  16.  
  17. Pull the front door trim to disengage clips from the body.
  18.  
  19. Pull the front door trim upward to disengage hooks B from the body.
  20.  
  21. Disconnect the trunk lid opener switch connector.
  22.  
  23. Disconnect the connector if equipped with a power window.
  24.  
  25. Disconnect the courtesy light.
  26.  
  27. Remove the screw and the switch.
  28.  

To install:

  1. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Front door trim-626

  2.  

 
label.common.footer.alt.autozoneLogo